Talk:Long Andre cargo bike

From OHO - search engine for sustainable open hardware projects

-- Thehunter (talk) 10:18, 7 April 2021 (CEST)

please change license to CC-BY-SA 4.0

Re: -- Inddigital (talk) 23:12, 9 April 2021 (CEST)


Part number 1.5 -- Thehunter (talk) 10:40, 7 April 2021 (CEST)

Here you could still enter whether it is a 26 inch frame or a 28 inch frame

Re: Part number 1.5 -- Inddigital (talk) 23:21, 9 April 2021 (CEST)

26 inches, added the specification in the parts list

-- Thehunter (talk) 10:41, 7 April 2021 (CEST)

material specifications are missing for almost all components

Re: -- Inddigital (talk) 23:12, 9 April 2021 (CEST)

-- Thehunter (talk) 10:50, 7 April 2021 (CEST)

have just seen that the material details are available on the drawing sheets, so from there it is o.k., material details in the parts list would be nice, but are not mandatory

Re: -- Inddigital (talk) 23:14, 9 April 2021 (CEST)

Ok, the materials are also indicated in the parts list

Part number 1.5 -- Thehunter (talk) 10:42, 7 April 2021 (CEST)

I assume that the frame must be steel so that it can be welded to the other components, is that correct?

if the outer diameter of the tube in which the wheel bearing is located is other than 39mm, this part must be adjusted accordingly

Re: Part number 1.5 -- Inddigital (talk) 23:23, 9 April 2021 (CEST)

Yes, the frame must be in steel, compatible with the type and material of the weld to be used.

Parts as indicated in item 1.1, must be adapted in case the frame used has different dimensions.

-- Thehunter (talk) 10:47, 7 April 2021 (CEST)

I assume that all connections between components that are not bolted are welded, is that correct?

Re: -- Inddigital (talk) 23:14, 9 April 2021 (CEST)

Correct, an annotation to this effect was included.

-- Thehunter (talk) 10:54, 7 April 2021 (CEST)

In the parts list the specific bicycle components are missing, such as brakes, ground cables, light system etc. but this results firstly from the various specific requirements, for example if the cargo bike is to transport larger loads drum brakes or disc brakes are recommended, so that these specific bicycle components must be adapted depending on the project. The parts list is therefore ok.

Re: -- Inddigital (talk) 23:15, 9 April 2021 (CEST)

Ok, thanks for the observation

-- Xtech2020 review (talk) 23:45, 7 April 2021 (CEST)

I think you should raise the fork position a little, as it is, the load would tilt slightly backwards, this implies that you should also modify the crossover setting.

Re: -- Inddigital (talk) 23:16, 9 April 2021 (CEST)

Right, I will improve that in another version of the project.

-- Xtech2020 review (talk) 23:49, 7 April 2021 (CEST)

When parking the bicycle, is it not necessary to have, for example, articulated legs to keep the load stable?

Re: -- Inddigital (talk) 23:17, 9 April 2021 (CEST)

We did not see any reference to this in the original source, but the observation is valid and will be taken into account for improvements.

Part number 1 -- Xtech2020 review (talk) 23:56, 7 April 2021 (CEST)

This assembly is missing some standard parts: wheels, seat and handlebar.

Re: Part number 1 -- Inddigital (talk) 23:19, 9 April 2021 (CEST)

yes, these parts were not included in the scope of the project, only as visual references in some of the drawings.
| |