Winnower Made of Wooden Parts
From OHO - search engine for sustainable open hardware projects
Winnower Made of Wooden Parts Basic Data Category: Crop production Keywords: winnower, made, wooden, parts, diy, oho License: CC BY-SA 4.0 Organization: University Eindhoven Project status: Active
Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
|
Technical documentation
Complete PDF plans | |
Files: |
CAD files | |
Files: |
+ General Reviews
Parts list
Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
---|---|---|---|---|---|---|---|---|
A1 | 1 | 3D views | ||||||
A2 | 1 | Exploded 3D view | ||||||
B1 | Parts list | |||||||
C1 | Technical notes | |||||||
1.0 | 2 | Side assembly | ||||||
1.1 | 2 | Side wall | Production | Thickness 18mm, plywood | ||||
1.2 | 2 | Profile sheet | Production | Thickness 10mm, plywood | ||||
1.3 | Sliding lath | Production | Hardwood, 10*20mm | |||||
1.4 | Suppot strip | Production | Hardwood, 6*20mm | |||||
1.5 | 2 | Legs1 | Production | DIN 10305-3, thickness 2mm, steel A36 | ||||
1.6 | 2 | Legs2 | Production | DIN 10305-3, thickness 2mm, steel A36 | ||||
1.7 | 2 | Bearing beam | Production | 25*50mm, hardwood | ||||
1.8 | Nut 1 | Standard | DIN 439 - M10 | |||||
1.9 | Washer 1 | Standard | DIN 125 - a 10.5 | |||||
1.10 | Wood screw 1_1 | Standard | DIN 97 3.5*35mm | |||||
1.11 | Wood screw 1_2 | Standard | DIN 97 4*50mm | |||||
2.0 | 1 | Fan assembly | ||||||
2.1 | 1 | Fan shaft.ipt | Production | Thickness 2mm, steel A36 | ||||
2.2 | 8 | Fan arm | Production | 20*10mm, hardwood | ||||
2.3 | 4 | Fan blade | Production | Thickness 4mm, hardboard | ||||
2.4 | Wood screw 2 | Standard | DIN 97 3.5*12mm | |||||
2.5 | Hex bolt | Standard | ISO 4014 - m5 X 45 | |||||
2.6 | Nut 2 | Standard | DIN 439 - m5 | |||||
3.0 | 1 | Housing assembly | ||||||
3.1 | 1 | Fan housing | Production | Thickness 4mm, bended, hardboard | ||||
3.2 | Fan housing2 | Production | Thickness 6mm, plywood | |||||
3.3 | Funnel roof | Production | Thickness 6mm, plywood | |||||
3.4 | Funnel bottom | Production | Thickness 6mm, plywood | |||||
3.5 | Suppor lath | Production | 20*10mm, HARDWOOD | |||||
4.0 | 1 | Drive assembly | ||||||
4.1 | Grooved Pulley2 | Buy | SPZ 160, aluminium | |||||
4.2 | Grooved Pulley1 | Buy | SPZ 50, aluminium | |||||
4.3 | V-Belt | Buy | Optibelt 10*6mm, 894mm | |||||
4.4 | 1 | Swingle bar | Production | Diameter 10mm, steel a36 | ||||
5.0 | 1 | Tray1 | Production | 620*300mm, thickness 6mm, plywood | ||||
6.0 | 1 | Tray2 | Production | Thickness 6mm, plywood | ||||
7.0 | 1 | Funnel roof movable | Production | Thickness 6mm, plywood | ||||
8.0 | 1 | Sliding lid | Production | Thickness 6mm, plywood | ||||
9.0 | 4 | Trreaded rod | Production | Diameter 10mm, Lenght 400mm, Steel A36 | ||||