Vice for drill press
URL (first publication): https://www.youtube.com/watch?v=NPA8uycWnyw
Keywords: bench vice, press, drill, hole, bore, perforation, metal, sheet, diy, workshop
License: CC BY-SA 4.0
Project status: Active
Maturity of the project: prototype
Contains PDF-drawings: Yes
CAD files are editable: Yes
Assembly instructions are published: Yes
Bill of materials is published: Yes
As a complementary project to the drill stand, a small drill press vice was developed here, which has the function of holding parts during drilling for small jobs in the workshop. Several examples were taken into account for the design, choosing as main reference, the Diamleon Diy Builds video on Youtube, to which some modifications were made to further facilitate the fabrication.
Some specifications of the manufactured vice:
- Jaw Size: 130mm[Width]x51mm[depth]x217mm[opening capacity].
- Material: Structural steel angles and threade rod.
- Mounting Mechanism: Base for drilling and screwing.
- Adjustable Jaw: Screw or handle by a 13mm threaded rod and a welded nut.
In an exploded view, you can see how the vice parts are assembled, for more detail, see this link
Tests, practical applications
In the manufacturing video, a small test is performed, where the good performance of the device is observed.
+ General Reviews
|Pos.||Qty.||Part Name||Part code||Part Type||Specifications||Review Status||Show All Comments|
|A2||1||Exploded 3D views|
|2||1||Fixed support 1||Production||Angle 2*2"*4mm|
|3||1||Fixed Support 2||Production||Angle 2*2"*4mm|
|4||1||Mobile Support 1||Production||Angle 2*2"*4mm|
|6||1||Power screw||Production||Threaded rod 1/2|
|7||5||Nut 1/2||Standard||Hex nut 1/2", UNC|
|8||2||Washer 1/2||Standard||Flat washer for 1/2"|
|9||1||Handle||Production||Round bar 1/2|
|10||12||Screw 1/4||Standard||Hexagonal screw 1/4*1", UNC|
|11||14||Nut 1/4||Standard||Hexagonal nut 1/4", UNC|
|12||2||Washer 1/4||Standard||Flat washer for 1/4|
|13||1||Mobile Support 2||Production||Angle 2*2"*4mm|