Tubular Plastic Biodigester
|
Tubular Plastic Biodigester Basic Data Category: Biogas Keywords: tubular, plastic, biodigester, diy, oho License: CC BY-SA 4.0 Organization: University of Aarhus Project status: Active Certification status: Approved Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
|
Technical documentation
Complete PDF plans | |
|
|
Files: | |
CAD files | |
|
|
Files: | |
Attestation | |
|
The project Tubular Plastic Biodigester was reviewed by two reviewers from the OHO team. The review consisted of the following components:
1. Completeness check: Checks if all required documents have been submitted. 2. Review of the submitted documents: Checks if the information in the submitted documents is complete and correct. 2.1 Bill of materials - Are all parts and assemblies covered? - Are all quantities correct? - Are all required material specifications available? - Are all specifications for purchased parts and standard parts complete? 3.2 Technical drawings - Are all the required views available? - Are all required dimensional data available? 4.1 Suggestions for improvement Detail abot the review process: https://en.oho.wiki/wiki/Instructions_for_Reviewers Permanent Link: https://en.oho.wiki/index.php?title=Tubular_Plastic_Biodigester&oldid=44315 |
Files: | |
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A1 | 1 | 3d views | - |
REV1: Approved |
|
|||
| A2 | - | Exploded 3d view | - |
REV1: Approved |
|
|||
| B1 | - | Parts list | - |
REV1: Approved |
|
|||
| C1 | - | Technical notes | - |
REV1: Approved |
|
|||
| 1.0 | - | Pit | - |
REV1: Approved |
|
|||
| 1.1 | 1 | Pit digester | Production | Polythene sheet 0.2mm thick |
REV1: Approved |
|
||
| 1.2 | 2 | Inlet and oulet | Standard | ASTM D 1785 schedule 40 4 L:600mm |
REV1: Approved |
|
||
| 1.3 | 1 | Cover inlet | Production | Mesh wire 25mm hex galvanized |
REV1: Approved |
|
||
| 1.4 | 1 | Adapter male A | Buy | DIN 8063 male adapter 1/2 |
REV1: Approved |
|
||
| 1.5 | 2 | Rubber washer A | Production | Made from used car tire |
REV1: Approved |
|
||
| 1.6 | 2 | Plastic circle A | Production | Made from plastic material |
REV1: Approved |
|
||
| 1.7 | 1 | Dung mixer pit | Production | Made from concrete |
REV1: Approved |
|
||
| 2.0 | - | Gas system | - |
REV1: Approved |
|
|||
| 2.1 | 1 | Adapter female A | Buy | DIN 8063 female adapter 1/2 |
REV1: Approved |
|
||
| 2.2 | 1 | Gas pipe A | Standard | ASTM D 1785 schedule 40 1/2 |
REV1: Approved |
|
||
| 2.3 | 2 | Valve | Buy | Bronze ball valve 3/8 |
REV1: Approved |
|
||
| 2.4 | 3 | Gas pipe B | Standard | ASTM D 1785 schedule 40 1/2 |
REV1: Approved |
|
||
| 2.5 | 3 | Elbow | Buy | ASTM D 2467 elbow 90 1/2 schedule 40 |
REV1: Approved |
|
||
| 2.6 | 3 | Gas pipe C | Standard | ASTM D 1785 schedule 40 1/2 |
REV1: Approved |
|
||
| 2.7 | 2 | Tee | Buy | ASTM D 2467 tee 1/2 schedule 40 |
REV1: Approved |
|
||
| 2.8 | 1 | Adapter female B | Buy | DIN 8063 female adapter 1/2 |
REV1: Approved |
|
||
| 2.9 | 1 | Adapter male B | Buy | DIN 8063 male adapter 1/2 |
REV1: Approved |
|
||
| 2.10 | 2 | Rubber washer B | Production | Made from used car tire |
REV1: Approved |
|
||
| 2.11 | 2 | Plastic circle B | Production | Made from plastic material |
REV1: Approved |
|
||
| 2.12 | 1 | Reservoir | Production | Polythene sheet 0.2mm thick |
REV1: Approved |
|
||
| 2.13 | 1 | Gas pipe D | Standard | ASTM D 1785 schedule 40 1/2 |
REV1: Approved |
|
||
| 2.14 | 1 | Plastic bottle | Production | Perforated plastic transparent bottle |
REV1: Approved |
|
||
| 2.15 | 1 | Burner | Buy | Gasmate cast iron single ring burner |
REV1: Approved |
|
||