Thickness Sander with 476 mm Width
|
Thickness Sander with 476 mm Width Basic Data Category: Sanders Keywords: thickness, sander, diy, oho License: CC BY-SA 4.0 Organization: Pat Hawley's Project status: Active Certification status: In process Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
|
Technical documentation
Complete PDF plans | |
|
|
Files: | |
CAD files | |
|
|
Files: | |
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A1 | 1 | 3d views |
REV1: Approved |
|
||||
| A2 | 1 | Exploded 3d view |
REV1: Approved |
|
||||
| B1 | 1 | Parts list |
REV1: Approved |
|
||||
| C1 | 1 | Technical notes |
REV1: Approved |
|
||||
| 1.0 | 1 | Frame assembly |
REV1: Approved |
|
||||
| 1.1 | 4 | Legs | Production | 50mm x 110mm x 990mm hardwood |
REV1: Approved |
|
||
| 1.2 | 4 | Top cross | Production | 50mm x 110mm hardwood |
REV1: Approved |
|
||
| 1.3 | 4 | Top side | Production | 50mm x 110mm hardwood |
REV1: Approved |
|
||
| 1.4 | 4 | Top S | Production | 50mm x 40mm x 100mm hardwood |
REV1: Approved |
|
||
| 1.5 | 56 | Wood screw2 | Standard | M8 screw countersunk head |
REV1: Approved |
|
||
| 2.0 | 1 | Motor assembly |
REV1: Approved |
|
||||
| 2.1 | 2 | Hinges | Buy | 76mm x 32mm Galvanized steel with holes |
REV1: Approved |
|
||
| 2.2 | 1 | Base motor | Production | 270mm x 250 mm hardwood |
REV1: Approved |
|
||
| 2.3 | 1 | Motor | Buy | Low-speed motor 1/2Hp -1725 r.p.m |
REV1: Approved |
|
||
| 2.4 | 1 | Vbelt pulley | Buy | 63,5mm OD X 16mm bore Steel C45 |
REV1: Approved |
|
||
| 2.5 | 1 | V belt | Buy | V belt standard 864mm (34) 4L340 EPDM |
REV1: Approved |
|
||
| 2.6 | 1 | Wood screw1 | Standard | 60mm long HEX FLANGE HEAD |
REV1: Approved |
|
||
| 2.7 | 8 | Wood screw3 | Standard | M6 screw countersunk head |
REV1: Approved |
|
||
| 2.8 | 4 | Screw4 | Standard | 35mm long HEX FLANGE HEAD |
REV1: Approved |
|
||
| 2.9 | 4 | Nut | Standard | M8 nut |
REV1: Approved |
|
||
| 3.0 | 1 | Table assembly |
REV1: Approved |
|
||||
| 3.1 | 4 | Hinges | Buy | 76mm x 32mm Galvanized steel with holes |
REV1: Approved |
|
||
| 3.2 | 2 | Tablet A | Production | 12mm x 476mm x 600mm Plywood |
REV1: Approved |
|
||
| 3.3 | 1 | Tablet B | Production | 19mm x 476mm x 600mm Plywood |
REV1: Approved |
|
||
| 3.4 | 1 | Handle | Production | 20mm x 30mm hardwood |
REV1: Approved |
|
||
| 3.5 | 1 | Sheet | Production | 1mm x 40mm x 60mm Steel A36 |
REV1: Approved |
|
||
| 3.6 | 8 | Wood screw3 | Standard | M6 screw countersunk head |
REV1: Approved |
|
||
| 3.7 | 1 | T bolt | Standard | M12 screw hexagon head |
REV1: Approved |
|
||
| 3.8 | 1 | Nut2 | Standard | M12 nut |
REV1: Approved |
|
||
| 4.0 | 1 | Drum assembly |
REV1: Approved |
|
||||
| 4.1 | 2 | Pillow block | Buy | Plain bering pilow blocks 25 bore |
REV1: Approved |
|
||
| 4.2 | 1 | Shaft | Production | Steel A36 |
REV1: Approved |
|
||
| 4.3 | 23 | Disks | Production | Hardwood |
REV1: Approved |
|
||
| 4.4 | 1 | Pulley 1 | Production | Hardwood |
REV1: Approved |
|
||
| 4.5 | 1 | Velcro | Buy | 1mm thickness Velcro |
REV1: Approved |
|
||
| 4.6 | 1 | Sandpaper | Buy | Sandpaper tray 100mm GR.60 |
REV1: Approved |
|
||
| 4.7 | 4 | Wood screw4 | Standard | 40 mm long HEX FLANGE HEAD |
REV1: Approved |
|
||
| 5.0 | 1 | Dust hood assembly |
REV1: Approved |
|
||||
| 5.1 | 2 | Piece A | Production | Hardwood |
REV1: Approved |
|
||
| 5.2 | 2 | Piece B | Production | 19mm x 140mm x 160mm Clear Acetate |
REV1: Approved |
|
||
| 5.3 | 1 | Piece C | Production | 140mm x 694mm Clear Acetate |
REV1: Approved |
|
||
| 5.4 | 2 | Piece D | Production | Hardwood |
REV1: Approved |
|
||
| 5.5 | 1 | Top | Production | Hardwood |
REV1: Approved |
|
||