Solar Water Heater with Serpentine Collector
Solar Water Heater with Serpentine Collector Basic Data Category: Solar collectors Keywords: solar, water, heater, serpentine, collector, diy, oho License: CC BY-SA 4.0 Organization: Appropriate Infrastructure Development Group Project status: Active Certification status: Approved Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
|
Technical documentation
Complete PDF plans | |
Files: |
CAD files | |
Files: |
Attestation | |
The project Solar Water Heater with Serpentine Collector was reviewed by two reviewers from the OHO team. The review consisted of the following components:
1. Completeness check: Checks if all required documents have been submitted. 2. Review of the submitted documents: Checks if the information in the submitted documents is complete and correct. 2.1 Bill of materials - Are all parts and assemblies covered? - Are all quantities correct? - Are all required material specifications available? - Are all specifications for purchased parts and standard parts complete? 3.2 Technical drawings - Are all the required views available? - Are all required dimensional data available? 4.1 Suggestions for improvement Detail abot the review process: https://en.oho.wiki/wiki/Instructions_for_Reviewers Permanent Link: https://en.oho.wiki/index.php?title=Solar_Water_Heater_with_Serpentine_Collector&oldid=44306 | |
Files: |
+ General Reviews
Parts list
Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
---|---|---|---|---|---|---|---|---|
A1 | 1 | 3d views |
REV1: Approved |
|||||
A2 | 1 | Explode 3d view |
REV1: Approved |
|||||
B1 | PART LIST |
REV1: Approved |
||||||
C1 | TECH NOTES |
REV1: Approved |
||||||
1.0 | 1 | Serpentine collector |
REV1: Approved |
|||||
1.1 | 1 | Backing plate | Production | Galvanized Steel |
REV1: Approved |
|||
1.2 | 1 | sections continuous | Production | U profile, Galvanized Steel #20 |
REV1: Approved |
|||
1.3 | 1 | Top section | Production | U profile, Galvanized Steel #20 |
REV1: Approved |
|||
1.4 | 3 | Spacers | Production | U profile, Galvanized Steel #20 |
REV1: Approved |
|||
1.5 | 1 | Zig-zag 1/2 " pipe | Production | pipe sch:1mm, Galvanized Steel |
REV1: Approved |
|||
1.6 | 1 | Ter-flex frame | Production | rubber |
REV1: Approved |
|||
1.7 | 1 | ter-flex backing | Standard | ter-flex backing, Rubber |
REV1: Approved |
|||
1.8 | 1 | cover glass | Production | Glass |
REV1: Approved |
|||
1.9 | 4 | angle 25 x 25 | Production | Steel C45 |
REV1: Approved |
|||
1.10 | 18 | Rivet-6x6x3 | Standard | Rivet-6x6x3 |
REV1: Approved |
|||
2.0 | 1 | Hot water tank |
REV1: Approved |
|||||
2.1 | 1 | Metal drum | Production |
REV1: Approved |
||||
2.2 | 2 | Ter-flex up tank | Production | Termaflex |
REV1: Approved |
|||
2.3 | 1 | Ter flex tank | Production | Termaflex |
REV1: Approved |
|||
2.4 | 1 | barrel plastic + lid | Production | HDPE |
REV1: Approved |
|||
2.5 | 1 | Cover metal drum | Production |
REV1: Approved |
||||
2.6 | 2 | adaptor 1/2" | Standard | threaded adaptor de PVC DN1/2" |
REV1: Approved |
|||
2.7 | 2 | Rubber seals | Production | Rubber |
REV1: Approved |
|||
2.8 | 4 | Nipple 1/2" | Standard | threaded coupling Galvanized steel,sch40 |
REV1: Approved |
|||
2.9 | 4 | Pipe 1/2 plg | Production | Long 150 mm, Glvanized Steel,sch40 |
REV1: Approved |
|||
3.0 | 1 | pipe 1/2"x1510 | Production | Pipe PVC,sch40 |
REV1: Approved |
|||
4.0 | 2 | Pipe 1/2" x1000 | Production | Pipe PVC,sch40 |
REV1: Approved |
|||
5.0 | 2 | Pipe 1/2"x900 | Production | Pipe PVC,sch40 |
REV1: Approved |
|||
6.0 | 2 | Pipe 1/2"x350 | Production | Pipe PVC, sch40 |
REV1: Approved |
|||
7.0 | 5 | pipe 1/2"x150 | Production | Pipe PVC, sch40 |
REV1: Approved |
|||
8.0 | 3,0m | Hose 1/2" | Standard | Rubber or vinyl |
REV1: Approved |
|||
9.0 | 4 | clamp | Standard | threaded clamp DN 1/2" |
REV1: Approved |
|||
10.0 | 7 | Elbow 1/2" | Standard | threaded Elbow DN1/2", Pipe PVC |
REV1: Approved |
|||
11.0 | 4 | Nipple 1/2" | Standard | threaded Nipple DN1/2", Pipe PVC |
REV1: Approved |
|||
12.0 | 2 | Tee 1/2" | Standard | threaded Tee DN1/2", Pipe PVC |
REV1: Approved |
|||