Parabolic Solar Cooker with Aluminium Reflector
|
Parabolic Solar Cooker with Aluminium Reflector Basic Data Category: Solar cooker Keywords: parabolic, solar, cooker, aluminium, reflector, diy, oho License: CC BY-SA 4.0 Organization: Aarhus University, Denmark Project status: Active Certification status: Approved Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
|
Technical documentation
Complete PDF plans | |
|
|
Files: | |
CAD files | |
|
|
Files: | |
Attestation | |
|
The project Parabolic Solar Cooker with Aluminium Reflector was reviewed by two reviewers from the OHO team. The review consisted of the following components:
1. Completeness check: Checks if all required documents have been submitted. 2. Review of the submitted documents: Checks if the information in the submitted documents is complete and correct. 2.1 Bill of materials - Are all parts and assemblies covered? - Are all quantities correct? - Are all required material specifications available? - Are all specifications for purchased parts and standard parts complete? 3.2 Technical drawings - Are all the required views available? - Are all required dimensional data available? 4.1 Suggestions for improvement Detail abot the review process: https://en.oho.wiki/wiki/Instructions_for_Reviewers Permanent Link: https://en.oho.wiki/index.php?title=Parabolic_Solar_Cooker_with_Aluminium_Reflector&oldid=44602 |
Files: | |
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A1 | - | 3d views | - |
REV1: Approved |
|
|||
| A2 | - | Exploded 3d view | - |
REV1: Approved |
|
|||
| B1 | - | Parts list | - |
REV1: Approved |
|
|||
| 1.0 | - | Stand | - |
REV1: Approved |
|
|||
| 1.1 | 1 | Woden battem | Production | Hardwood 25x25x1000mm |
REV1: Approved |
|
||
| 1.2 | 1 | Supporting tube | Standard | ASTM 269 G316L Steel tube D:10mm L:1000mm |
REV1: Approved |
|
||
| 1.3 | 1 | Rubber plate | Production | Rubber 3mm |
REV1: Approved |
|
||
| 1.4 | 1 | Steel bar A | Production | Steel A36 bar 3x20mm |
REV1: Approved |
|
||
| 1.5 | 2 | Steel bar B | Production | Steel A36 bar 3x20mm |
REV1: Approved |
|
||
| 1.6 | 1 | Steel bar C | Production | Steel A36 bar 3x20mm |
REV1: Approved |
|
||
| 1.7 | 2 | Steel bar D | Production | Steel A36 bar 3x20mm |
REV1: Approved |
|
||
| 1.8 | 2 | Steel bar E | Production | Steel A36 bar 3x20mm |
REV1: Approved |
|
||
| 1.9 | 1 | Steel bar F | Production | Steel A36 bar 3x20mm |
REV1: Approved |
|
||
| 1.10 | 1 | Steel bar G | Production | Steel A36 bar 3x20mm |
REV1: Approved |
|
||
| 1.11 | 4 | Steel fastening | Production | Aluminium sheet 1x20x20x70mm |
REV1: Approved |
|
||
| 1.12 | 20 | Screw A | Standard | DIN EN 24017 M5x14mm |
REV1: Approved |
|
||
| 1.13 | 4 | Washer | Standard | DIN 125-1 M5 |
REV1: Approved |
|
||
| 1.14 | 18 | Nut | Standard | DIN EN 24035 M5 |
REV1: Approved |
|
||
| 1.15 | 2 | Wing nut | Standard | DIN 315 M5 |
REV1: Approved |
|
||
| 1.16 | 1 | Screw B | Standard | DIN EN ISO 4766 M6x12mm |
REV1: Approved |
|
||
| 2.0 | - | Receiver | - |
REV1: Approved |
|
|||
| 2.1 | 20 | Mirror section A | Production | Bright aluminium 1mm |
REV1: Approved |
|
||
| 2.2 | 1 | Mirror section B | Production | Bright aluminium 1mm |
REV1: Approved |
|
||
| 2.3 | 1 | Base plate | Production | Plywood 8mm |
REV1: Approved |
|
||
| 2.4 | 1 | Nail | Buy | Steel nail 2.5x60mm |
REV1: Approved |
|
||
| 2.5 | 4 | Screw C | Standard | DIN 571 M4x14mm |
REV1: Approved |
|
||
| 2.6 | 120 | Rivet | Standard | DIN 7337 - A4 x 12 x 6,5mm |
REV1: Approved |
|
||