Himalayan Water Wheel
|
Himalayan Water Wheel Basic Data Category: Pelton turbines URL (first publication): https://www.youtube.com/watch?v=dAP-mppfXr8 Keywords: turbine, wheel, pelton, hidraulic, turbomachinery, impulse, reaction, water, renewable, sustainable, electric power, dynamo, nepal, grinder, river, diy, oho License: CC BY-SA 4.0 Organization: Unicef Project status: Active Certification status: Approved Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: Yes Bill of materials is published: Yes
yes yes
|
Description
Pelton type open impeller waterwheel for dynamo electric power generation (Grinder not included)
Project published under CC-BY-SA 4.0 license
This project was supported by the german Foundation E.ON Stiftung.
Technical documentation
Complete PDF Plans | |
|
|
Files: | |
CAD Files | |
|
|
Files: | |
Attestation | |
|
The project Himalayan Water Wheel was reviewed by two reviewers from the OHO team. The review consisted of the following components:
1. Completeness check: Checks if all required documents have been submitted. 2. Review of the submitted documents: Checks if the information in the submitted documents is complete and correct. 2.1 Bill of materials - Are all parts and assemblies covered? - Are all quantities correct? - Are all required material specifications available? - Are all specifications for purchased parts and standard parts complete? 3.2 Technical drawings - Are all the required views available? - Are all required dimensional data available? 4.1 Suggestions for improvement Detail abot the review process: https://en.oho.wiki/wiki/Instructions_for_Reviewers Permanent Link: https://en.oho.wiki/index.php?title=Himalayan_Water_Wheel&oldid=44318 |
Files: | |
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A1 | 1 | oseg_hww_Himalayan-Water-Wheel | A1 |
REV1: Approved |
|
|||
| A2 | 1 | oseg_hww_Himalayan-Water-Wheel | A2 |
REV1: Approved |
|
|||
| B1-2 | PART LIST | B1-2 |
REV1: Approved |
|
||||
| C1 | TECH NOTES | C1 |
REV1: Approved |
|
||||
| 1.0.0 | 3 | Axle fixation | 1.0.0 |
REV1: Approved |
|
|||
| 1.1.0 | 3 | Backl plate | 1.1.0 | Production | Steel C45 |
REV1: Approved |
|
|
| 1.2.0 | 6 | Lateral plate | 1.2.0 | Production | Steel C45 |
REV1: Approved |
|
|
| 1.3.0 | 6 | Bronze bush | 1.3.0 | Production | Bronze |
REV1: Approved |
|
|
| 1.4.0 | 3 | Front plate | 1.4.0 | Production | Steel C45 |
REV1: Approved |
|
|
| 1.5.0 | 6 | Bolt-M12x95 | 1.5.0 | Production | Steel C45 |
REV1: Approved |
|
|
| 1.6.0 | 6 | Nut M12 | 1.6.0 | Standard | Nut M12 |
REV1: Approved |
|
|
| 1.7.0 | 6 | Washer-M12 | 1.7.0 | Standard | Washer-M12 |
REV1: Approved |
|
|
| 2.0.0 | 1 | Axle pivote | 2.0.0 |
REV1: Approved |
|
|||
| 2.1.0 | 1 | Axle | 2.1.0 | Production | Steel C45 |
REV1: Approved |
|
|
| 2.2.0 | 1 | Pivote | 2.2.0 | Production | Steel C45 |
REV1: Approved |
|
|
| 2.3.0 | 1 | Iron-plate | 2.3.0 | Production | Steel C45 |
REV1: Approved |
|
|
| 3.0.0 | 1 | Frame | 3.0.0 |
REV1: Approved |
|
|||
| 3.1.0 | 1 | horizontal-75x50x750 | 3.1.0 | Production | Structural Steel, ASTM-A36 |
REV1: Approved |
|
|
| 3.2.0 | 3 | horizontal-75x50x850 | 3.2.0 | Production | Structural Steel, ASTM A-36 |
REV1: Approved |
|
|
| 3.3.0 | 2 | Floor-nevel-75x50x1500 | 3.3.0 | Production | StructuralSteel, ASTM A-36 |
REV1: Approved |
|
|
| 3.4.0 | 2 | supporting-laths-50x25x1300 | 3.4.0 | Production | Structural Steel, ASTM A-36 |
REV1: Approved |
|
|
| 3.5.0 | 1 | Angle 50x50x125 | 3.5.0 | Production | Steel C45 |
REV1: Approved |
|
|
| 4.0.0 | 1 | Turbine | 4.0.0 |
REV1: Approved |
|
|||
| 4.1.0 | 1 | Hub | 4.1.0 |
REV1: Approved |
|
|||
| 4.1.1 | 1 | Hub cylinder | 4.1.1 | Production | Steel C45 |
REV1: Approved |
|
|
| 4.1.2 | 2 | Hub shaft | 4.1.2 | Production | Steel C45 |
REV1: Approved |
|
|
| 4.1.3 | 2 | Hub ring | 4.1.3 | Production | Steel C45 |
REV1: Approved |
|
|
| 4.2.0 | 12 | Spoon-one | 4.2.0 |
REV1: Approved |
|
|||
| 4.2.1 | 12 | Spoon | 4.2.1 | Production | Steel C45 |
REV1: Approved |
|
|
| 4.2.2 | 12 | Spood shaft | 4.2.2 | Production | Steel C45 |
REV1: Approved |
|
|
| 4.3.0 | 2 | Spoon ring | 4.3.0 | Production | Steel C45 |
REV1: Approved |
|
|
| 5.0.0 | 1 | Fly wheel D400 | 5.0.0 | Standard |
REV1: Approved |
|
||
| 6.0.0 | 1 | Fly wheel D100 | 6.0.0 | Standard |
REV1: Approved |
|
||
| 7.0.0 | 1 | Dynamo | 7.0.0 | Buy |
REV1: Approved |
|
||
| 8.0.0 | 1 | Nozzle pipe | 8.0.0 | Production | Gavanized Steel |
REV1: Approved |
|
|
| 9.0.0 | 6 | Bolt-M15x75 | 9.0.0 | Standard | Bolt M15x75 |
REV1: Approved |
|
|
| 10.0.0 | 6 | Nut M15 | 10.0.0 | Standard | Nut M15 |
REV1: Approved |
|
|