Bench Vice
Bench Vice Basic Data Category: Screw clamps Keywords: bench vice press wokshop metal work License: CERN OHL v1.2 Project status: Active Translation status: 4-Manual Translation Technical documentation Maturity of the project: prototype
Contains PDF-drawings: Yes Assembly instructions are published: No Bill of materials is published: Yes Contributing guide is published: No Mechanical hardware Contains original mechanical hardware: Yes CAD Format: License for mechanical hardware: CERN OHL v1.2 Electronic hardware Contains original electronic hardware: No
no yes no
Other Contains original software: No
Technology Readyness Level TRL: 2
|
|
Description
This is a simple model for a workshop bench vice without casting parts and made of simple, welded parts. It can be made in any simple locksmith's shop or metal workshop with simple equipment. You only need a drill, a metal saw and a welding machine to make it. It consists of two jaws, one of which is fixed and the other can be moved by a spindle.
Technical documentation
Bench Vice Cad Files | |
![]() |
|
Files: |
Banch Vice Complete PDF | |
![]() |
|
Files: |
+ General Reviews 
Parts list
Pos. | Pos. old | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
---|---|---|---|---|---|---|---|---|---|
A | Bench vice | A | ![]() |
||||||
B | Parts list | B | ![]() |
||||||
1 | 1 | SPINDLE | 1 | ![]() |
|||||
1.1 | 1 | THERAD | 1.1 | Production | steel C45 | ![]() |
|||
1.2 | 1 | BOSS | 1.2 | Production | steel C45 | ![]() |
|||
1.3 | 1 | HANDLE | 1.3 | Production | steel C45 | ![]() |
|||
1.4 | 2 | WASHERS | 1.4 | Standard | ![]() |
||||
1.5 | 2 | ISO 7414 - M12 | 1.5 | Standard | ![]() |
||||
1.6 | 2 | SPLIT PIN | 1.6 | Standard | ![]() |
||||
2 | 1 | MOBILE CLAMPING JAW | 2 | ![]() |
|||||
2.1 | 1 | JAW | 2.1 | Production | steel C45 | ![]() |
|||
2.2 | 1 | SLIDE TOWER | 2.2 | Production | steel C45 | ![]() |
|||
2.3 | 1 | TOWER TOP | 2.3 | Production | steel C45 | ![]() |
|||
2.4 | 1 | SLIDE BACK | 2.4 | Production | steel C45 | ![]() |
|||
2.5 | 2 | HEX JAM NUT | 2.5 | Standard | ![]() |
||||
2.6 | 1 | BACK SUPPORT | 2.6 | Production | steel C45 | ![]() |
|||
2.7 | 1 | SLIDE | 2.7 | Production | steel C45 | ![]() |
|||
2.8 | 2 | ISO 1207 - M10 x 25 | 2.8 | Standard | ![]() |
||||
3 | 1 | FIXED CLAMPING JAW | 3 | ![]() |
|||||
3.1 | 1 | BASE | 3.1 | Production | steel C45 | ![]() |
|||
3.2 | 2 | BODY SIDE | 3.2 | Production | steel C45 | ![]() |
|||
3.3 | 1 | BODY TOP | 3.3 | Production | steel C45 | ![]() |
|||
3.4 | 1 | NUT | 3.4 | Production | steel C45 | ![]() |
|||
3.5 | 1 | BODY TOWER | 3.5 | Production | steel C45 | ![]() |
|||
3.6 | 1 | BODY BACK | 3.6 | Production | steel C45 | ![]() |
|||
Property "Desc" (as page type) with input value "This is a simple model for a workshop bench vice without casting parts and made of simple, welded parts. It can be made in any simple locksmith's shop or metal workshop with simple equipment. You only need a drill, a metal saw and a welding machine to make it. It consists of two jaws, one of which is fixed and the other can be moved by a spindle." contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process.