Axial Flow Turbine 25kW
|
Axial Flow Turbine 25kW Basic Data Category: Water turbines URL (first publication): https://www.youtube.com/watch?v=qK_UT7IC0yI Keywords: turbine, flow, axial, water, diy, oho License: CC BY-SA 4.0 Organization: Practical Action Project status: Active Certification status: Approved Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
Technical documentation
Complete PDF plans | |
|
|
Files: | |
CAD files | |
|
|
Files: | |
Attestation | |
|
The project Axial Flow Turbine 25kW was reviewed by two reviewers from the OHO team. The review consisted of the following components:
1. Completeness check: Checks if all required documents have been submitted. 2. Review of the submitted documents: Checks if the information in the submitted documents is complete and correct. 2.1 Bill of materials - Are all parts and assemblies covered? - Are all quantities correct? - Are all required material specifications available? - Are all specifications for purchased parts and standard parts complete? 3.2 Technical drawings - Are all the required views available? - Are all required dimensional data available? 4.1 Suggestions for improvement Detail abot the review process: https://en.oho.wiki/wiki/Instructions_for_Reviewers Permanent Link: https://en.oho.wiki/index.php?title=Axial_Flow_Turbine_25kW&oldid=44309 |
Files: | |
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A1 | 1 | 3d views |
REV1: Approved |
|
||||
| A2 | 1 | Exploded 3d view |
REV1: Approved |
|
||||
| B1 | 1 | Parts list |
REV1: Approved |
|
||||
| C1 | 1 | Technical notes |
REV1: Approved |
|
||||
| 1.0 | 1 | Alignment of vanes assembly |
REV1: Approved |
|
||||
| 1.1 | 1 | Alignment of vanes | Production | DIN C45 |
REV1: Approved |
|
||
| 1.2 | 1 | Alignment of vanes 1 | Production | DIN C45 |
REV1: Approved |
|
||
| 1.3 | 1 | Alignment of vanes 2 | Production | DIN C45 |
REV1: Approved |
|
||
| 1.4 | 1 | Inlet cone | Production | DIN C45 |
REV1: Approved |
|
||
| 1.5 | 1 | Ring | Production | DIN C45 |
REV1: Approved |
|
||
| 1.6 | 24 | Vane | Production | DIN C45 |
REV1: Approved |
|
||
| 1.7 | 16 | Alignment of vanes bolt M14 | Standard | DIN 933 M14x28x1.5 |
REV1: Approved |
|
||
| 1.8 | 16 | Alignment of vanes washer | Standard | DIN 125-1 A A 15 |
REV1: Approved |
|
||
| 2.0 | 1 | Propeller assembly |
REV1: Approved |
|
||||
| 2.1 | 1 | Propeller | Production | DIN C45 |
REV1: Approved |
|
||
| 2.2 | 1 | Cone | Production | DIN C45 |
REV1: Approved |
|
||
| 2.3 | 3 | Hexagon Socket Set Screw | Standard | Hexagonal 6.35"x22.225" |
REV1: Approved |
|
||
| 3.0 | 1 | Propeller cover assembly |
REV1: Approved |
|
||||
| 3.1 | 1 | Propeller cover | Production | DIN C45 |
REV1: Approved |
|
||
| 3.2 | 1 | Propeller cover top | Production | DIN C45 |
REV1: Approved |
|
||
| 3.3 | 6 | Fixed vane | Production | DIN C45 |
REV1: Approved |
|
||
| 3.4 | 1 | Flange cover | Production | DIN C45 |
REV1: Approved |
|
||
| 3.5 | 12 | Cover bolt M18 | Standard | DIN 933 M18X35x1.5 |
REV1: Approved |
|
||
| 3.6 | 12 | Cover nut M18 | Standard | DIN 555 M18 |
REV1: Approved |
|
||
| 3.7 | 24 | Cover washer | Standard | DIN 433-1 A 19 |
REV1: Approved |
|
||
| 4.0 | 1 | Drive pulley assembly |
REV1: Approved |
|
||||
| 4.1 | 1 | Drive pulley | Production | DIN C45 |
REV1: Approved |
|
||
| 4.2 | 1 | Drive pulley 1 | Production | DIN C45 |
REV1: Approved |
|
||
| 4.3 | 1 | Adjusting cone | Production | DIN C45 |
REV1: Approved |
|
||
| 4.4 | 3 | V-Belt transmision | Buy | ANSI/RMA IP-22 5VX500 |
REV1: Approved |
|
||
| 4.5 | 3 | Drive pulley bolt M14 | Standard | DIN 933 M14x45x15 |
REV1: Approved |
|
||
| 5.0 | 1 | Shaft | Production | 0D 60 DIN C45 |
REV1: Approved |
|
||
| 6.0 | 1 | Bearings bottom |
REV1: Approved |
|
||||
| 6.1 | 1 | Bearings | Production | DIN C45 |
REV1: Approved |
|
||
| 6.2 | 1 | Bearing 1 | Production | DIN C45 |
REV1: Approved |
|
||
| 6.3 | 1 | Bearing 60 | Buy | SKF 22313 |
REV1: Approved |
|
||
| 6.4 | 8 | Bearing bolt M8 | Standard | DIN 933 M8x25x1.5 |
REV1: Approved |
|
||
| 6.5 | 4 | Bearing stud M14 | Standard | UNI 5910 M14x35x1.5 |
REV1: Approved |
|
||
| 6.6 | 4 | Bearing nut M14 | Standard | DIN 555 M14 |
REV1: Approved |
|
||
| 6.7 | 4 | Bearing washer | Standard | DIN 433-1 A 15 |
REV1: Approved |
|
||
| 7.0 | 1 | Bearing top assembly |
REV1: Approved |
|
||||
| 7.1 | 1 | Bearings | Production | DIN C45 |
REV1: Approved |
|
||
| 7.2 | 1 | Bearings 2 | Production | DIN C45 |
REV1: Approved |
|
||
| 7.3 | 1 | Bearing 60 | Buy | SKF 22313 |
REV1: Approved |
|
||
| 7.4 | 8 | Bearing bolt M8 | Standard | DIN 933 M8x25x1.5 |
REV1: Approved |
|
||
| 7.5 | 4 | Bearing bolt M14 | Standard | DIN 933 M14x50x1.5 |
REV1: Approved |
|
||
| 7.6 | 4 | Bearing nut M14 | Standard | DIN 555 M14 |
REV1: Approved |
|
||
| 7.7 | 8 | Bearing washer | Standard | DIN 433-1 A 15 |
REV1: Approved |
|
||
| 8.0 | 1 | Seal housing assembly |
REV1: Approved |
|
||||
| 8.1 | 1 | Seal housing | Production | DIN C45 |
REV1: Approved |
|
||
| 8.2 | 1 | Seal housing out | Production | DIN C45 |
REV1: Approved |
|
||
| 8.3 | 1 | Seal housing support 155 | Production | DIN C45 |
REV1: Approved |
|
||
| 8.4 | 1 | Seal housing support 450 | Production | DIN C45 |
REV1: Approved |
|
||
| 8.5 | 4 | Seal housing bolt M10x25 | Standard | DIN 933 M10x28x1.5 |
REV1: Approved |
|
||
| 8.6 | 4 | Seal housing bolt M10x40 | Standard | DIN 933 M10x40x1.5 |
REV1: Approved |
|
||
| 8.7 | 12 | Seal housing stud M14 | Standard | UNI 5910 Mx14x35x1.5 |
REV1: Approved |
|
||
| 8.8 | 12 | Seal housing nut M14 | Standard | DIN 934 M14x1.5 |
REV1: Approved |
|
||
| 8.9 | 12 | Seal housing washer | Standard | DIN 125-1 A A 15 |
REV1: Approved |
|
||
| 9.0 | 1 | Bearing support assembly |
REV1: Approved |
|
||||
| 9.1 | 1 | Bearing support | Production | DIN C45 |
REV1: Approved |
|
||
| 9.2 | 1 | Bearing support 1 | Production | DIN C45 |
REV1: Approved |
|
||
| 9.3 | 1 | Bearing support 2 | Production | DIN C45 |
REV1: Approved |
|
||
| 9.4 | 4 | Bearing support stud | Standard | UNI 5910 Mx14x30x1.5 |
REV1: Approved |
|
||
| 9.5 | 4 | Bearing support nut | Standard | DIN 555 M14 |
REV1: Approved |
|
||
| 9.6 | 4 | Bearing support washer | Standard | DIN 125-1 A A 15 |
REV1: Approved |
|
||
| 10.0 | 1 | Generator base assembly |
REV1: Approved |
|
||||
| 10.1 | 1 | Generator base | Production | Thk 13 ASTM A36 |
REV1: Approved |
|
||
| 10.2 | 2 | Generator base 747 | Production | 160x6x7 ASTM A36 |
REV1: Approved |
|
||
| 10.3 | 2 | Generator base 720 | Production | 160x6x7 ASTM A36 |
REV1: Approved |
|
||
| 10.4 | 1 | Generator base 700 | Production | 160x6x7 ASTM A36 |
REV1: Approved |
|
||
| 11.0 | 1 | Frame assembly |
REV1: Approved |
|
||||
| 11.1 | 1 | Frame 150 | Production | Thk 6 ASTM A36 |
REV1: Approved |
|
||
| 11.2 | 1 | Frame 200 | Production | Thk 6 ASTM A36 |
REV1: Approved |
|
||
| 11.3 | 1 | Frame 340 | Production | Thk 6 ASTM A36 |
REV1: Approved |
|
||
| 11.4 | 1 | Cantilever | Production | Thk 6 ASTM A36 |
REV1: Approved |
|
||
| 11.5 | 1 | Cantilever base | Production | Thk 6 ASTM A36 |
REV1: Approved |
|
||
| 11.6 | 6 | Generator base bolt | Standard | DIN 933 M20x35 |
REV1: Approved |
|
||
| 11.7 | 6 | Generator base nut | Standard | DIN 555 M20 |
REV1: Approved |
|
||
| 11.8 | 12 | Generator base washer | Standard | DIN 433 A 21 |
REV1: Approved |
|
||
| 12.0 | 1 | Spiral casing | Production |
REV1: Approved |
|
|||
| 12.1 | 1 | Segment 1-1 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.2 | 1 | Segment 1-2 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.3 | 1 | Segment 2-3 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.4 | 1 | Segment 3-4 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.5 | 1 | Segment 4-5 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.6 | 1 | Segment 5-6 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.7 | 1 | Segment 6-7 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.8 | 1 | Segment 7-8 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.9 | 1 | Segment 8-9 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.10 | 1 | Segment 9-10 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.11 | 1 | Segment 10-11 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.12 | 1 | Segment 11-12 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.13 | 1 | Segment 12-13 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.14 | 1 | Segment 13-14 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.15 | 1 | Segment 14-15 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.16 | 1 | Segment 15-16 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.17 | 1 | Segment 16-17 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.18 | 1 | Segment 17-18 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.19 | 1 | Segment 18-19 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.20 | 1 | Segment 19-20 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.21 | 1 | Segment 20-21 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.22 | 1 | Segment 21-22 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 12.23 | 1 | Segment 22-23 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 13.0 | Diffuser tube | Production |
REV1: Approved |
|
||||
| 13.1 | 1 | Segment diffuser 0-0 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 13.2 | 1 | Segment diffuser 0-1 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 13.3 | 1 | Segment diffuser 1-2 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 13.4 | 1 | Segment diffuser 2-3 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 13.5 | 1 | Segment diffuser 3-4 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 13.6 | 1 | Segment diffuser 4-5 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 13.7 | 1 | Segment diffuser 5-6 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 13.8 | 1 | Segment diffuser 6-7 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 13.9 | 1 | Segment diffuser 7-8 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 13.10 | 1 | Segment diffuser 8-9 | Production | Thk 3.175 ASTM A569 |
REV1: Approved |
|
||
| 14.0 | 1 | Manometer | Buy | Manometer type Bourdon |
REV1: Approved |
|
||
| 15.0 | 1 | Dynamo | Buy | Dynamo Matari 25kW |
REV1: Approved |
|
||