Savonius Rotor of 1m Diameter
From OHO - search engine for sustainable open hardware projects
Revision as of 14:07, 21 December 2021 by Inddigital (talk | contribs)
Savonius Rotor of 1m Diameter Basic Data Category: Savonius wind turbines Keywords: savonius, rotor, diy, oho License: CC BY-SA 4.0 Organization: Youtube - Lerrypage Project status: Active Certification status: In process Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
|
Technical documentation
Complete PDF plans | |
Files: |
+ General Reviews
Parts list
Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
---|---|---|---|---|---|---|---|---|
A1 | 1 | 3D views | ||||||
A2 | 1 | Exploded 3D view | ||||||
B1 | Parts list | |||||||
C1 | Technical notes | |||||||
1.0.0 | 1 | Rotor | ||||||
1.1.0 | 3 | Sheet steel | thickness: 1,0 mm, Galvanized Steel | |||||
1.2.0 | 2 | Plate sheet | Production | thickness:1,0 mm, Galvanized Steel | ||||
1.3.0 | 1 | Support rotor | ||||||
1.3.1 | 2 | Tube support | Production | Schd 40, Steel A36 | ||||
1.3.2 | 2 | Angle | Production | L 25x25x3, Steel A36 | ||||
1.4.0 | 3 | Center sheet | Production | thickness: 1,0 mm, Galvanized Steel | ||||
2.0.0 | 1 | Lower shaft | Production | Steel C45 | ||||
3.0.0 | 1 | Tubular shaft | Production | Schd 40, Steel C45 | ||||
4.0.0 | 1 | Upper shaft | Production | Steel C45 | ||||
5.0.0 | 1 | Fly wheel | Buy | Fly wheel, medium, D:600 x1, Aluminum | ||||
6.0.0 | 1 | Fly wheel small | Buy | Fly wheel small, D:150 x1, Aluminum | ||||
7.0.0 | 1 | Belt transmission | Buy | Belt transmission, type V, Rubber | ||||
8.0.0 | Generator | Buy | Generator, DC Motor 80 V | |||||
9.0.0 | 3 | Bearing | Standard | Bearing, Bridge UCPL207-107D1 | ||||
10.0.0 | 4 | Bolt shaft | Standard | Bolt shaft, M10 x L:50 DIN 933 | ||||
11.0.0 | 10 | Nut | Standard | Nut, Hex M10 DIN 934 | ||||