Floating Dome Biodigestor
From OHO - search engine for sustainable open hardware projects
Floating Dome Biodigestor Basic Data Category: Biogas digester Keywords: floating, dome, biodigestor, diy, oho License: CC BY-SA 4.0 Organization: Appropriate Infrastructure Development Group Project status: Active Certification status: In process Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
|
Technical documentation
Complete PDF plans | |
Files: |
CAD files | |
Files: |
+ General Reviews
Parts list
Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
---|---|---|---|---|---|---|---|---|
A1 | 1 | Floating DomeBiodigestor | ||||||
A2 | 1 | Floating dome biodigestor | ||||||
B1 | PART LIST | |||||||
C1 | TECH NOTES | |||||||
1.0 | 1 | Large tank | ||||||
1.1 | 1 | Large tank | Production | 1000 lts. Plastic, high-density polythene.(HDPE) water tanks, HDPE | ||||
1.2 | 1 | Female fitting pvc | Standard | Female fitting pvc, fitting pvc 4plg, PVC piping | ||||
1.3 | 1 | Female fitting short | Production | Fitting pvc 4 plg, PVC Piping | ||||
1.4 | 2 | Male fitting | Standard | Male fitting, fitting pvc 4", PVC piping | ||||
1.5 | 1 | Pvc pipe 4plg x 450 | Production | PVC piping | ||||
1.6 | 4 | Rubber washers 4plg | Production | thick 3 mm, Rubber | ||||
2.0 | 1 | Pvc small tank | Production | 750 lts. Plastic, high-density polythene.(HDPE) water tanks, HDPE | ||||
3.0 | 1 | Feedstock Inlet pipe | ||||||
3.1 | 1 | Pvc tee | Standard | Pvc tee, D: 4 inch, PVC piping | ||||
3.2 | 2 | Pvc pipe 4" x 150 mm | Production | PVC piping | ||||
3.3 | 1 | Male fitting | Standard | Male fitting, fitting pvc 4", PVC piping | ||||
3.4 | 1 | Pvc plug | Standard | Pvc plug, fitting pvc 4", PVC piping | ||||
3.5 | 1 | Pvc pipe 4" x 950 mm | Production | PVC piping | ||||
3.6 | 1 | Metal funnel | Production | sheet of scrap metal 115 x 35cm, steel C45 | ||||
4.0 | 1 | Residue outlet | ||||||
4.1 | 1 | Pvc pipe 4" x 150 mm | Production | PVC piping | ||||
4.2 | 1 | Pvc elbow | Standard | Pvc elbow, fitting pvc 4", PVC piping | ||||
4.3 | 1 | Pvc pipe 4" x 250 mm | Production | PVC piping | ||||
5.0 | 1 | Limiting structure | ||||||
5.1 | 1 | Ring iron | Production | Plet iron 25 x 3 mm, Steel C45 | ||||
5.2 | 4 | pipe 1/2" pvc lateral | Production | PVC piping | ||||
5.3 | 2 | Pipe 1/2 pvc lateral 2 | Production | PVC piping | ||||
5.4 | 2 | Pipe 1/2 pvc down | Production | PVC piping | ||||
5.5 | 4 | Elbow A1 1/2 | Standard | Elbow A1 1/2, PVC piping | ||||
5.6 | 4 | Flat iron | Production | Steel C45 | ||||
5.7 | 6 | Bolt M6 x 25 | Standard | Bolt M6 x 25, Steel C45 | ||||
5.8 | 6 | Nut 6M x 1 | Standard | Nut 6M x 1, Steel C45 | ||||
6.0 | 1 | Gas outlet | ||||||
6.1 | 1 | Coupler pvc 1 1/2x3/4 | Standard | Coupler pvc 1 1/2x3/4, PVC piping | ||||
6.2 | 1 | Reducer male female3/4x1/2 | Standard | Reducer male female 3/4x1/2, PVC piping | ||||
6.3 | 1 | Adaptor hose 1/2 | Standard | Adaptor hose 1/2, PVC piping | ||||
6.4 | 3 mts | 1/2" Flexible hose | Standard | 1/2" Flexible hose, Rubber | ||||
6.5 | 2 | 1/2 hose clamp | Standard | 1/2 hose clamp | ||||
7.0 | 1 | Gas burner | ||||||
7.1 | 1 | Shut off valve 1/2" | Standard | Shut off valve 1/2", Shut off valve 1/2", Bronce | ||||
7.2 | 1 | Burner plate | Production | Steel C45 | ||||
7.3 | 1 | Burner | Production | Steel C45 | ||||
7.4 | 4 | Tubular iron D:25x500 | Production | Piping Iron, ASTM A36 | ||||
7.5 | 11 | Iron bar D:15 x 300 | Production | Iron bar D:15, Steel C45 | ||||
7.6 | 2 | Angle 25 x 25 x 3 | Production | rolled steel angle, ASTM A36 | ||||