Vice for drill press
Project data
Category: Vises URL (first publication): https://www.youtube.com/watch?v=NPA8uycWnyw Keywords: bench vice, press, drill, hole, bore, perforation, metal, sheet, diy, workshop License: CC BY-SA 4.0 Organization: OHO Project status: Active
Maturity of the project: prototype
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: Yes Bill of materials is published: Yes
yes yes
|
Project details
Description
As a complementary project to the drill stand, a small drill press was developed here, which has the function of holding parts during drilling for small jobs in the workshop. Several examples were taken into account for the design, choosing as main reference, the Diamleon Diy Builds video on Youtube, to which some modifications were made to further facilitate the fabrication.
Technical documentation
PDF plans | |
Files: |
CAD files | |
Files: |
+ General Reviews
Reviews
Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
---|---|---|---|---|---|---|---|---|
A1 | 1 | 3D Views | ||||||
A2 | 1 | Exploded 3D views | ||||||
B1 | Parts list | |||||||
1 | 2 | Rail | Production | Angle 2*2"*4mm | ||||
2 | 1 | Fixed support 1 | Production | Angle 2*2"*4mm | ||||
3 | 1 | Fixed Support 2 | Production | Angle 2*2"*4mm | ||||
4 | 1 | Mobile Support 1 | Production | Angle 2*2"*4mm | ||||
5 | 2 | Sides | Production | Angle 1*1*1/8 | ||||
6 | 1 | Power screw | Production | Threaded rod 1/2 | ||||
7 | 5 | Nut 1/2 | Standard | Hex nut 1/2", UNC | ||||
8 | 2 | Washer 1/2 | Standard | Flat washer for 1/2" | ||||
9 | 1 | Handle | Production | Round bar 1/2 | ||||
10 | 12 | Screw 1/4 | Standard | Hexagonal screw 1/4*1", UNC | ||||
11 | 14 | Nut 1/4 | Standard | Hexagonal nut 1/4", UNC | ||||
12 | 2 | Washer 1/4 | Standard | Flat washer for 1/4 | ||||
13 | 1 | Mobile Support 2 | Production | Angle 2*2"*4mm | ||||