Difference between revisions of "Workshop Crane powered by drill"
Inddigital (talk | contribs) |
Inddigital (talk | contribs) |
||
| Line 275: | Line 275: | ||
|matparttype=buy | |matparttype=buy | ||
|matspec=DEPENDS ON ITEM 1.20 | |matspec=DEPENDS ON ITEM 1.20 | ||
|status_rev_1= | |status_rev_1=action required | ||
}}{{ProjektMaterials | }}{{ProjektMaterials | ||
|matpartnumber=2 | |matpartnumber=2 | ||
Revision as of 19:52, 16 December 2020
|
Workshop Crane powered by drill Basic Data Category: Mobile cranes URL (first publication): https://www.youtube.com/watch?v=FGPVdLr42Yg Keywords: workshop, crane, diy, drill, reverse engneering, drawings, measure, 3d, perspective, match, image, parametric, cad, modelling, fea, analysis License: CERN OHL v1.2 Project status: Active Certification status: In process Technical documentation Maturity of the project: prototype
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: Yes Bill of materials is published: Yes
yes yes
|
Description
Workshop crane powered by a hand drill Based on a video, the necessary parameters were determined to build the equipment in a professional way. Several tools were used such as perspective photo adjustment, anthropometric data to process images where people interact, mechanical resistance analysis, among others.
This project is published under the terms of the CERN-OHL
Technical documentation
Development Guide | |
|
|
Files: | |
PDF plans | |
|
|
Files: | |
Frame Analysis Report - example | |
|
|
Files: | |
CAD files | |
|
|
Files: | |
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A1 | 1 | WORKSHOP CRANE | A1 |
REV1: Approved |
|
|||
| A2 | 1 | WORKSHOP CRANE | A2 |
REV1: Approved |
|
|||
| B1 | PART LIST | B |
REV1: Approved |
|
||||
| 1 | 1 | Main Frame | 1 |
REV1: Approved |
|
|||
| 1.1 | 1 | Tube 50*50*4*1000 mm | 1.1 | Production | EN 10210-2, STEEL A36 |
REV1: Approved |
|
|
| 1.2 | 2 | Tube 50*50*4*172 mm | 1.2 | Production | EN 10210-2, STEEL A36 |
REV1: Approved |
|
|
| 1.3 | 1 | Tube 60*60*4*350 mm | 1.3 | Production | EN 10210-2, STEEL A36 |
REV1: Approved |
|
|
| 1.4 | 2 | Tube 50*50*4*360 mm | 1.4 | Production | EN 10210-2, STEEL A36 |
REV1: Approved |
|
|
| 1.5 | 1 | Tube 50*50*4*310 mm | 1.5 | Production | EN 10210-2, STEEL A36 |
REV1: Approved |
|
|
| 1.6 | 1 | Tube 50*50*4*470 mm | 1.6 | Production | EN 10210-2, STEEL A36 |
REV1: Approved |
|
|
| 1.7 | 1 | Tube 60*60*4*638 mm | 1.7 | Production | EN 10210-2, STEEL A36 |
REV1: Approved |
|
|
| 1.8 | 4 | flat steel bar 45*8*145 mm | 1.8 | Production | EN 10058, STEEL A36 |
REV1: Approved |
|
|
| 1.9 | 1 | Tube 60*60*4*1400 mm | 1.9 | Production | EN 10210-2, STEEL A36 |
REV1: Approved |
|
|
| 1.10 | 4 | flat steel bar 50*12*145 mm | 1.10 | Production | EN 10058, STEEL A36 |
REV1: Approved |
|
|
| 1.11 | 2 | flat steel bar 25*5*1308 mm | 1.11 | Production | EN 10058, STEEL A36 |
REV1: Approved |
|
|
| 1.12 | 2 | flat steel bar 45*8*135 mm | 1.12 | Production | EN 10058, STEEL A36 |
REV1: Approved |
|
|
| 1.13 | 2 | Hex-Head Bolt | 1.13 | Standard | DIN 931-1 - M14 x 90 |
REV1: Approved |
|
|
| 1.14 | 11 | Hex Nut | 1.14 | Standard | DIN 555-5 - M14 |
REV1: Approved |
|
|
| 1.15 | 1 | Hex-Head Bolt | 1.15 | Standard | DIN 931-1 - M14 x 55 |
REV1: Approved |
|
|
| 1.16 | 4 | Hex-Head Bolt | 1.16 | Standard | DIN 931-1 - M14 x 75 |
REV1: Approved |
|
|
| 1.17 | 4 | WHEEL | 1.17 | Buy | CAP 200 KG |
REV1: Approved |
|
|
| 1.18 | 1 | PULLEY | 1.18 | Buy | D 50 mm, CABLE 10 mm |
REV1: Approved |
|
|
| 1.19 | 1 | Reducer | 1.19 | Buy | i = 1:100, SECURITY BRAKE |
REV1: Action required |
|
|
| 1.20 | 1 | Bearing | 1.20 | Buy | DEPENDS ON ITEM 1.20 |
REV1: Approved |
|
|
| 1.21 | 1 | Hollow Shaft | 1.21 | Buy | DEPENDS ON ITEM 1.20 |
REV1: Action required |
|
|
| 2 | 1 | Pivot Arm | 2 |
REV1: Action required |
|
|||
| 2.1 | 1 | Tube 60*60*4*500 mm | 2.1 | Production | EN 10210-2, STEEL A36 |
REV1: Approved |
|
|
| 2.2 | 2 | flat steel bar 45*8*222 mm | 2.2 | Production | EN 10058, STEEL A36 |
REV1: Approved |
|
|
| 2.3 | 1 | Hex-Head Bolt | 2.3 | Standard | DIN 931-1 - M14 x 90 |
REV1: Approved |
|
|
| 2.4 | 1 | Hex Nut | 2.4 | Standard | DIN 555-5 - M14 |
REV1: Approved |
|
|
| 3 | 1 | Telescopic Tube | 3 |
REV1: Action required |
|
|||
| 3.1 | 2 | flat steel bar 45*8*267 mm | 3.1 | Production | EN 10058, STEEL A36 |
REV1: Approved |
|
|
| 3.2 | 1 | Tube 50*50*4*890 mm | 3.2 | Production | EN 10210-2, STEEL A36 |
REV1: Approved |
|
|
| 3.3 | 1 | Hex-Head Bolt | 3.3 | Standard | DIN 931-1 - M14 x 80 |
REV1: Approved |
|
|
| 3.4 | 1 | Hex Nut | 3.4 | Standard | DIN 555-5 - M14 |
REV1: Approved |
|
|
| 3.5 | 1 | PULLEY | 3.5 | Buy | D 50 mm, CABLE 10 mm |
REV1: Approved |
|
|
| 4 | 1 | Lef Leg | 4 |
REV1: Action required |
|
|||
| 4.1 | 1 | Tube 50*50*4*1340 mm | 4.1 | Production | EN 10210-2, STEEL A36 |
REV1: Approved |
|
|
| 4.2 | 1 | flat steel bar 50*12*145 mm | 4.2 | Production | EN 10058, STEEL A36 |
REV1: Approved |
|
|
| 4.3 | 1 | WHEEL | 4.3 | Buy | CAP 200 KG |
REV1: Approved |
|
|
| 4.4 | 1 | Hex Nut | 4.4 | Standard | DIN 555-5 - M14 |
REV1: Approved |
|
|
| 5 | 1 | Right Leg | 5 |
REV1: Approved |
|
|||
| 5.1 | 1 | Tube 50*50*4*1340 mm | 5.1 | Production | EN 10210-2, STEEL A36 |
REV1: Approved |
|
|
| 5.2 | 1 | flat steel bar 50*12*145 mm | 5.2 | Production | EN 10058, STEEL A36 |
REV1: Approved |
|
|
| 5.3 | 1 | WHEEL | 5.3 | Buy | CAP 200 KG |
REV1: Action required |
|
|
| 5.4 | 1 | Hex Nut | 5.4 | Standard | DIN 555-5 - M14 |
REV1: Approved |
|
|
| 6 | 1 | Arm | 6 |
REV1: Approved |
|
|||
| 6.1 | 1 | Tube 60*60*4*1125 mm | 6.1 | Production | EN 10210-2, STEEL A36 |
REV1: Approved |
|
|
| 6.2 | 1 | Hex-Head Bolt | 6.2 | Standard | DIN 931-1 - M14 x 75 |
REV1: Approved |
|
|
| 6.3 | 1 | Hex Nut | 6.3 | Standard | DIN 555-5 - M14 |
REV1: Approved |
|
|