Talk:Zigzag Solar water heater

Part number B -- Xtech2020 review (talk) 03:33, 3 March 2021 (CET)

It seems that the containers used are 200 L, however, in the part list it says 2000 L.

The amount shown on the drawings is 16

Thanks for the comment, I'll check that out

The amount shown on the drawings is 64

Thanks for the comment, I'll check that out

Indicate the estimated capacity of the equipment

According to the original source, when a system is properly insulated, hot water can be drawn 24 hours a day.

you must place the material of the pieces in the column specifications

The sheet column should be updated

This part must be marked on the drawing of Assembly 2

specify material

I have just updated this item in the part list, then, when I do the rest of the checks, I will proceed with the respective pages of the PDF.

200 L container

Half of a 200 L container

The direction of water flow is nowhere to be seen, a hydraulic diagram is needed.

the slip of each collector with respect to its neighboring collector is not specified.

What are the standard sizes for galvanized sheets? so as not to waste material.