Difference between revisions of "Talk:Workshop Crane powered by drill"
From OHO - search engine for sustainable open hardware projects
Line 20: | Line 20: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
! D [inch] !! D [mm] !! Safe Load [kN] |- | ! D [inch] !! D [mm] !! Safe Load [kN] | ||
|- | |||
| 1/4 || 6.4 || 4.89 | | 1/4 || 6.4 || 4.89 | ||
|- | |- |
Revision as of 00:56, 16 December 2020
-- Inddigital (talk) 14:26, 15 December 2020 (CET)
Excellent project, very good analysis, just a consultation:
- Do you have a reference gearbox in the current market?
Re: -- Aquilesmorillo (talk) 23:18, 15 December 2020 (CET)
Thank you, the most important thing is to select a gearbox with a high ratio like the one used here of 1:100 and with the required safety to prevent the load from being returned. Here is a reference, that supplier offers reducers with auto-blocking system (99 series) and with the required ratio:
http://www.bj-gear.com/en/products/standard-solutions/gearboxes/worm-gearboxes/
Part number 1.18 -- Inddigital (talk) 23:43, 15 December 2020 (CET)
Will a 10 mm cable be sufficient to carry a 200 kg load?
Re: Part number 1.18 -- Aquilesmorillo (talk) 23:54, 15 December 2020 (CET)
Sure, you can use this table as a guide:
D [inch] | D [mm] | Safe Load [kN] |
---|---|---|
1/4 | 6.4 | 4.89 |
5/16 | 8 | 7.56 |
3/8 | 9.5 | 10.9 |
716 | 11.5 | 14.7 |
1/2 | 13 | 19.0 |
9/16 | 14.5 | 24.0 |
5/8 | 16 | 29.7 |
3/4 | 19 | 42.3 |
7/8 | 22 | 57.4 |
1 | 26 | 74.3 |