Difference between revisions of "Talk:Solar Water Heater - Capacity 100L"

Revision as of 01:10, 13 January 2023

-- Xtech2020 review (talk) 23:50, 12 January 2023 (CEST)

The perforations are missing in the insulating walls for the pipes to pass through, although it is not a critical detail, this can be quickly deduced during manufacturing

Part number 4.00 -- Xtech2020 review (talk) 23:52, 12 January 2023 (CEST)

It is recommended to evaluate if it is necessary to place flexible sections in the pipes, to withstand thermal expansion

Part number 1.05 -- Xtech2020 review (talk) 23:54, 12 January 2023 (CEST)

In this sheet, the capture of solar energy can be optimized, simply with a coating of black paint, this detail is not observed in the project

Part number 3.05 -- Xtech2020 review (talk) 23:56, 12 January 2023 (CEST)

Here you can include a relief valve so that it only works to release the excess pressure and this access is not all the time losing heat from the tank

Part number 3.02 -- Xtech2020 review (talk) 23:58, 12 January 2023 (CEST)

Please include a commercial reference

@@ Line 1: / Line 1: @@
+==  -- [[User:Xtech2020 review|Xtech2020 review]] ([[User talk:Xtech2020 review|talk]]) 23:50, 12 January 2023 (CEST) ==
+The perforations are missing in the insulating walls for the pipes to pass through, although it is not a critical detail, this can be quickly deduced during manufacturing
 == Part number 4.00 -- [[User:Xtech2020 review|Xtech2020 review]] ([[User talk:Xtech2020 review|talk]]) 23:52, 12 January 2023 (CEST) ==
 It is recommended to evaluate if it is necessary to place flexible sections in the pipes, to withstand thermal expansion