Difference between revisions of "Talk:Metal Folding Machine"

Revision as of 06:48, 18 February 2022

-- Xtech2020 review (talk) 05:27, 17 February 2022 (CET)

Perform the necessary cuts in all metal profiles, as operations prior to welding (corner splices, among others).
Specifications of all metal profiles and fasteners (DIN code or equivalent information).
It is recommended to perform a stress analysis to confirm that the equipment will withstand the loads and remain stable.

Part number 5 -- Xtech2020 review (talk) 05:31, 17 February 2022 (CET)

Complete the rectangle underneath the machine with metal angles.

Part number 4 -- Xtech2020 review (talk) 05:37, 17 February 2022 (CET)

The length of these bolts appears to be insufficient to secure the clamping profiles.
Include section views, where the operation of these screws can be observed, this would also facilitate fabrication.
It is also observed that the bolt is out of phase with respect to its nut.

Part number 2.8 -- Xtech2020 review (talk) 05:48, 18 February 2022 (CET)

These screws do not seem to have an apparent function as such, in case they function as reinforcement, it is suggested to cut a piece of sheet metal or metal profile.

@@ Line 14: / Line 14: @@
 * Include section views, where the operation of these screws can be observed, this would also facilitate fabrication.
 * It is also observed that the bolt is out of phase with respect to its nut.
+== Part number 2.8 -- [[User:Xtech2020 review|Xtech2020 review]] ([[User talk:Xtech2020 review|talk]]) 05:48, 18 February 2022 (CET) ==
+These screws do not seem to have an apparent function as such, in case they function as reinforcement, it is suggested to cut a piece of sheet metal or metal profile.