Difference between revisions of "Talk:Metal Folding Machine"
From OHO - search engine for sustainable open hardware projects
(→Part number 5 -- ~~~~: new section) |
(→Part number 4 -- ~~~~: new section) |
||
Line 8: | Line 8: | ||
* Complete the rectangle underneath the machine with metal angles. | * Complete the rectangle underneath the machine with metal angles. | ||
== Part number 4 -- [[User:Xtech2020 review|Xtech2020 review]] ([[User talk:Xtech2020 review|talk]]) 05:37, 17 February 2022 (CET) == | |||
* The length of these bolts appears to be insufficient to secure the clamping profiles. | |||
* Include section views, where the operation of these screws can be observed, this would also facilitate fabrication. |
Revision as of 06:37, 17 February 2022
-- Xtech2020 review (talk) 05:27, 17 February 2022 (CET)
- Perform the necessary cuts in all metal profiles, as operations prior to welding (corner splices, among others).
- Specifications of all metal profiles and fasteners (DIN code or equivalent information).
- It is recommended to perform a stress analysis to confirm that the equipment will withstand the loads and remain stable.
Part number 5 -- Xtech2020 review (talk) 05:31, 17 February 2022 (CET)
- Complete the rectangle underneath the machine with metal angles.
Part number 4 -- Xtech2020 review (talk) 05:37, 17 February 2022 (CET)
- The length of these bolts appears to be insufficient to secure the clamping profiles.
- Include section views, where the operation of these screws can be observed, this would also facilitate fabrication.