Difference between revisions of "Talk:Metal Folding Machine"
From OHO - search engine for sustainable open hardware projects
(→Part number 4 -- ~~~~: new section) |
(→Part number 4.2 -- ~~~~: new section) |
||
(7 intermediate revisions by the same user not shown) | |||
Line 3: | Line 3: | ||
* Perform the necessary cuts in all metal profiles, as operations prior to welding (corner splices, among others). | * Perform the necessary cuts in all metal profiles, as operations prior to welding (corner splices, among others). | ||
* Specifications of all metal profiles and fasteners (DIN code or equivalent information). | * Specifications of all metal profiles and fasteners (DIN code or equivalent information). | ||
* It is recommended to perform a stress analysis to confirm that the equipment will withstand the loads and remain stable. | * It is recommended to perform a stress analysis to confirm that the equipment will withstand the loads and remain stable, without the need for anchors, e.g. | ||
== Part number 5 -- [[User:Xtech2020 review|Xtech2020 review]] ([[User talk:Xtech2020 review|talk]]) 05:31, 17 February 2022 (CET) == | == Part number 5 -- [[User:Xtech2020 review|Xtech2020 review]] ([[User talk:Xtech2020 review|talk]]) 05:31, 17 February 2022 (CET) == | ||
Line 13: | Line 13: | ||
* The length of these bolts appears to be insufficient to secure the clamping profiles. | * The length of these bolts appears to be insufficient to secure the clamping profiles. | ||
* Include section views, where the operation of these screws can be observed, this would also facilitate fabrication. | * Include section views, where the operation of these screws can be observed, this would also facilitate fabrication. | ||
* It is also observed that the bolt is out of phase with respect to its nut. | |||
== Part number 2.8 -- [[User:Xtech2020 review|Xtech2020 review]] ([[User talk:Xtech2020 review|talk]]) 05:48, 18 February 2022 (CET) == | |||
These screws do not seem to have an apparent function as such, in case they function as reinforcement, it is suggested to cut a piece of sheet metal or metal profile. | |||
== Part number A1 -- [[User:Xtech2020 review|Xtech2020 review]] ([[User talk:Xtech2020 review|talk]]) 05:53, 18 February 2022 (CET) == | |||
Interference is observed between the fixed angle and the movable angle, this will make it difficult to turn the bending mechanism. | |||
[https://i.imgur.com/hUl0ZY7.png See the capture] | |||
== Part number A1 -- [[User:Xtech2020 review|Xtech2020 review]] ([[User talk:Xtech2020 review|talk]]) 06:13, 18 February 2022 (CET) == | |||
To achieve a good bending, set 3.0 must be placed in such a way that piece 3.2 maintains a minimum distance of 3.2 mm with respect to the front of piece 2.1, in order to guarantee a good bending radius in an extreme case such as a 16 gauge sheet (1.6 mm thick). | |||
[https://i.imgur.com/MxKLZA1.png See the capture] | |||
== Part number 4.2 -- [[User:Xtech2020 review|Xtech2020 review]] ([[User talk:Xtech2020 review|talk]]) 06:18, 18 February 2022 (CET) == | |||
This part is not found in the assemblies. |
Latest revision as of 07:18, 18 February 2022
-- Xtech2020 review (talk) 05:27, 17 February 2022 (CET)
- Perform the necessary cuts in all metal profiles, as operations prior to welding (corner splices, among others).
- Specifications of all metal profiles and fasteners (DIN code or equivalent information).
- It is recommended to perform a stress analysis to confirm that the equipment will withstand the loads and remain stable, without the need for anchors, e.g.
Part number 5 -- Xtech2020 review (talk) 05:31, 17 February 2022 (CET)
- Complete the rectangle underneath the machine with metal angles.
Part number 4 -- Xtech2020 review (talk) 05:37, 17 February 2022 (CET)
- The length of these bolts appears to be insufficient to secure the clamping profiles.
- Include section views, where the operation of these screws can be observed, this would also facilitate fabrication.
- It is also observed that the bolt is out of phase with respect to its nut.
Part number 2.8 -- Xtech2020 review (talk) 05:48, 18 February 2022 (CET)
These screws do not seem to have an apparent function as such, in case they function as reinforcement, it is suggested to cut a piece of sheet metal or metal profile.
Part number A1 -- Xtech2020 review (talk) 05:53, 18 February 2022 (CET)
Interference is observed between the fixed angle and the movable angle, this will make it difficult to turn the bending mechanism.
Part number A1 -- Xtech2020 review (talk) 06:13, 18 February 2022 (CET)
To achieve a good bending, set 3.0 must be placed in such a way that piece 3.2 maintains a minimum distance of 3.2 mm with respect to the front of piece 2.1, in order to guarantee a good bending radius in an extreme case such as a 16 gauge sheet (1.6 mm thick).
Part number 4.2 -- Xtech2020 review (talk) 06:18, 18 February 2022 (CET)
This part is not found in the assemblies.