Talk:Manual shearing machine for 3mm plate
From OHO - search engine for sustainable open hardware projects
Revision as of 20:09, 20 January 2023 by Inddigital (talk | contribs)
Feasibility study - Materials, components -- xtech2020_review (talk) 18:06, 20 January 2023 (CET)
Although leaf spring steel sheets can be found in junkyards, it may be necessary to adapt the design to the various thicknesses that can be achieved.
- True, in any case, consideration is very simple. for each millimeter that the thickness of the blades increases, the bushings will increase their length by 2 mm --Inddigital (talk) 18:51, 20 January 2023 (CET)
- The same would happen with the width of the central support (piece 2.2) --xtech2020_review (talk) 18:57, 20 January 2023 (CET)
Search & analisis DIY technologies - Manual search -- xtech2020_review (talk) 18:07, 20 January 2023 (CET)
Why do you choose the Metal Extreme machine as your main reference?
- This machine was taken as a reference by:
- Its Characteristics, it can cut sheet up to 3mm thick and 205mm long
- Clarity of explanations regarding dimensions and processes
- The precision in the cuts that is observed
- --Inddigital (talk) 18:52, 20 January 2023 (CET)