Talk:Carla Cargo Crowd
From OHO - search engine for sustainable open hardware projects
Revision as of 03:19, 11 April 2021 by Inddigital (talk | contribs) (→Part number 3 -- Xtech2020 review (talk) 02:01, 8 April 2021 (CEST))
-- Xtech2020 review (talk) 08:04, 16 December 2020 (CET)
Steel A36 is recommended for structural profiles and leave C45 for machined parts.
https://www.makeitfrom.com/compare/ASTM-A36-SS400-S275-Structural-Carbon-Steel/EN-1.0503-C45-Non-Alloy-Steel
Re: -- Inddigital (talk) 03:18, 11 April 2021 (CEST)
- Ok, corrections have been made
-- Xtech2020 review (talk) 01:43, 8 April 2021 (CEST)
On uneven terrain, a suspension system such as springs for vertical loads on the rear wheel supports may be useful.
Re: -- Inddigital (talk) 03:18, 11 April 2021 (CEST)
- All right, I will take this into account for a project improvement.
Part number 1 -- Xtech2020 review (talk) 01:46, 8 April 2021 (CEST)
Obviously they are welded parts, it would be good to indicate this in the specifications, since doing so in the drawings would add a lot of symbols.
Re: Part number 1 -- Inddigital (talk) 03:19, 11 April 2021 (CEST)
- Well, an annotation was added in this regard
Part number 3 -- Xtech2020 review (talk) 02:01, 8 April 2021 (CEST)
missing part number balloons
Re: Part number 3 -- Inddigital (talk) 03:19, 11 April 2021 (CEST)
- Done
Part number 4.2 -- Xtech2020 review (talk) 02:24, 8 April 2021 (CEST)
This part should be purchased, for example:
https://www.ebay.com/itm/Bike-trailer-hitch-coupler-connector-seat-tube-post-attachment-bicycle-adapter-/124447710784