Pipe Bending Machine
From OHO - search engine for sustainable open hardware projects
Revision as of 00:15, 15 December 2020 by Xtech2020 review (talk | contribs)
Pipe Bending Machine Basic Data Category: Tube benders Keywords: metalworking, bending, pipe, tube, machine, elbow, thickness, material, metal, diy, abatec License: CERN OHL v1.2 Organization: ApT Project status: Active
Technical documentation Maturity of the project: prototype
Contains PDF-drawings: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
|
Description
Detailed drawings for building a tube bender
Project published under CERN-OHL license
Technical documentation
PDF Plans | |
Files: |
CAD Files - part 1 | |
Files: |
CAD Files - part 2 | |
Files: |
Documentation | |
Files: |
+ General Reviews
Parts list
Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
---|---|---|---|---|---|---|---|---|
A1 | 1 | PIPE BENDING MACHINE | A1 | Steel C45 | ||||
A2 | 1 | PIPE BENDING MACHINE | A2 | Steel C45 | ||||
B1 | 1 | PARTS LITS | B1 | Steel C45 | ||||
1 | 1 | SUB-PIPE BENDING MACHINE 1 | 1 | Steel C45 | ||||
1.1 | 1 | FRAME | 1.1 | Production | FRAME | |||
1.2 | 1 | MAIN PIN | 1.2 | Production | MAIN PIN | |||
1.3 | 1 | STIFFENER | 1.3 | Production | STIFFENER | |||
1.4 | 1 | FORMER STOP | 1.4 | Production | FORMER STOP | |||
1.5 | 2 | SAE J487a - 3/32 x 1 Extended Prong Square Cut Type | 1.5 | Standard | Pin - Cotter | |||
2 | 1 | SUB-PIPE BENDING MACHINE 2 | 2 | Steel C45 | ||||
2.1 | 1 | FOOT | 2.1 | Production | FOOT | |||
2.2 | 1 | SUPPORT LEG | 2.2 | Production | SUPPORT LEG | |||
2.3 | 1 | MAIN LEG | 2.3 | Production | MAIN LEG | |||
2.4 | 1 | ANSI B18.2.3.2M - M10 x 1,5 | 2.4 | Standard | Metric Formed Hex Screw - Formed Hex Screw - Metric (2) | |||
2.5 | 6 | ANSI B18.2.4.5M - M10 x 1.5 | 2.5 | Standard | Hex Jam Nut | |||
3.0 | 1 | SUB-PIPE BENDING MACHINE 3 | 3.0 | Steel C45 | ||||
3.1 | 1 | HANDLE | 3.1 | Production | HANDLE | |||
3.2 | 1 | FORMER SPACER | 3.2 | Production | FORMER SPACER | |||
3.3 | 1 | HANDLE ARM | 3.3 | Production | HANDLE ARM | |||
3.4 | 1 | HANDLE SPACER | 3.4 | Production | HANDLE SPACER | |||
3.5 | 1 | ROLLER | 3.5 | Production | ROLLER | |||
4 | 1 | SUB-PIPE BENDING MACHINE 4 | 4 | Steel C45 | ||||
4.1 | 1 | ROLLER PIN | 4.1 | Production | ROLLER PIN | |||
4.2 | 1 | PIN HANDLE | 4.2 | Production | PIN HANDLE | |||
5 | 1 | SUB-PIPE BENDING MACHINE 5 | 5 | Steel C45 | ||||
5.1 | 1 | STOP TUBE | 5.1 | Production | STOP TUBE | |||
5.2 | 1 | STOP ANGLE | 5.2 | Production | STOP ANGLE | |||
6 | 1 | SUB-PIPE BENDING MACHINE 6 | 6 | Steel C45 | ||||
6.1 | 1 | GUIDE ANGLE | 6.1 | Production | GUIDE ANGLE | |||
6.2 | 1 | GUIDE BASE | 6.2 | Production | GUIDE BASE | |||
7 | 1 | SUB-PIPE BENDING MACHINE 7 | 7 | Steel C45 | ||||
7.1 | 1 | FORMER BASE | 7.1 | Production | FORMER SIDE | |||
7.2 | 1 | FORMER SIDE | 7.2 | Production | FORMER SIDE | |||
7.3 | 1 | SPACER TUBE | 7.3 | Production | SPACER TUBE | |||
7.4 | 1 | PIN LINK | 7.4 | Production | PIN LINK | |||
7.5 | 5 | ANSI B18.2.3.5M - M10 x 1,5 x 45 | 7.5 | Standard | Hex Bolt | |||