Honey Extractor
Honey Extractor Basic Data Category: Honey extractors Keywords: beekeeping, bee, honey, extractor, centrifugal, manual, diy License: CC BY 4.0 Organization: Garden Way Research Project status: Active
Technical documentation Maturity of the project: prototype
Contains PDF-drawings: Yes Assembly instructions are published: Yes Bill of materials is published: Yes
yes yes
|
|
Description
This Honey Extractor is designed to fit a standard, 20 gallon hot dipped galvanized trash can. Drill or cut a hole as close to the bottom of the can as possible, and solder a pipe nipple in place; this is the honey drain. Check the can for water leaks. Resolder joints if necessary.
It can be adapted to work with a variable speed drill
This project was developed by GARDEN WAY RESEARCH 1975 © and published under licence CC-BY
+ General Reviews