Honey Extractor
From OHO - search engine for sustainable open hardware projects
Revision as of 02:28, 12 December 2020 by Aquilesmorillo (talk | contribs) (Created page with "{{Projekt |subcat=Honey extractors |projectname=Honey Extractor |projectnameES=Extractor de Miel |projectnameDE=Bienenhonig-Schleuder |kewords=beekeeping, bee, honey, extracto...")
Honey Extractor Basic Data Category: Honey extractors Keywords: beekeeping, bee, honey, extractor, centrifugal, manual, diy
no no no
|
[[File:|frameless|link=|300x300px|class=imgproject_gallery]] |
Description
This Honey Extractor is designed to fit a standard, 20 gallon hot dipped galvanized trash can. Drill or cut a hole as close to the bottom of the can as possible, and solder a pipe nipple in place; this is the honey drain. Check the can for water leaks. Resolder joints if necessary.
It can be adapted to work with a variable speed drill
This project was developed by GARDEN WAY RESEARCH 1975 © and published under licence CC-BY
+ General Reviews