Difference between revisions of "Honey Extractor"
Inddigital (talk | contribs) |
|||
Line 16: | Line 16: | ||
|projectnameDE=Bienenhonig-Schleuder | |projectnameDE=Bienenhonig-Schleuder | ||
|kewords=beekeeping, bee, honey, extractor, centrifugal, manual, diy | |kewords=beekeeping, bee, honey, extractor, centrifugal, manual, diy | ||
|firstin=https://www.youtube.com/watch?v=fA4PiHWiLEs&t=195s | |||
|trans_status=WT | |trans_status=WT | ||
|desc=<p>This Honey Extractor is designed to fit a standard, 20 gallon hot dipped galvanized trash can. Drill or cut a hole as close to the bottom of the can as possible, and solder a pipe nipple in place; this is the honey drain. Check the can for water leaks. Resolder joints if necessary.</p> | |desc=<p>This Honey Extractor is designed to fit a standard, 20 gallon hot dipped galvanized trash can. Drill or cut a hole as close to the bottom of the can as possible, and solder a pipe nipple in place; this is the honey drain. Check the can for water leaks. Resolder joints if necessary.</p> |
Revision as of 06:31, 7 October 2021
Bee Honey Extractor Basic Data Category: Honey extractors URL (first publication): https://www.youtube.com/watch?v=fA4PiHWiLEs&t=195s Keywords: beekeeping, bee, honey, extractor, centrifugal, manual, diy License: CC BY 4.0 Organization: Garden Way Research Project status: Active Certification status: In process Technical documentation Maturity of the project: prototype
Contains PDF-drawings: Yes Assembly instructions are published: Yes Bill of materials is published: Yes
yes yes
|
Description
This Honey Extractor is designed to fit a standard, 20 gallon hot dipped galvanized trash can. Drill or cut a hole as close to the bottom of the can as possible, and solder a pipe nipple in place; this is the honey drain. Check the can for water leaks. Resolder joints if necessary.
It can be adapted to work with a variable speed drill
This project was developed by GARDEN WAY RESEARCH 1975 © and published under licence CC-BY
Technical documentation
PDF Plans | |
Files: |
CAD Files | |
Files: |
+ General Reviews
Parts list
Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
---|---|---|---|---|---|---|---|---|
A | 1 | HONEY EXTRACTOR | A | |||||
B | 1 | PART LIST | B | |||||
1 | 1 | SHAFT | 1 | |||||
1.1 | 1 | TOP SUPPORT | 1.1 | Production | ||||
1.2 | 2 | CLAMP BLOCK | 1.2 | Production | ||||
1.3 | 1 | SHAFT | 1.3 | Production | ||||
1.4 | 1 | BEARING BLOCK | 1.4 | Production | ||||
1.5 | 1 | FRAME PULLEY | 1.5 | Production | ||||
1.6 | 1 | PULLEY A | 1.6 | Production | ||||
1.7 | 1 | PULLEY B | 1.7 | Production | ||||
1.8 | 2 | CURVE TO FIT INSIDE RIM | 1.8 | Production | ||||
1.9 | 1 | WOOD HANDLE | 1.9 | Production | ||||
1.10 | 1 | FRAME BLOCK | 1.10 | Production | ||||
1.11 | 2 | ANSI/AFBMA 24.1 TA - 12TA11 12 x 26 x 9 | 1.11 | Standard | ||||
1.12 | 2 | ANSI B18.17 - 1/4 - 20 Regular, TAWNI | 1.12 | Standard | ||||
1.13 | 2 | ANSI B18.5 - 1/4-20 UNC - 2, RHBI | 1.13 | Standard | ||||
1.14 | 11 | ANSI B18.2.2 - 1/2 - 13, HHJNI | 1.14 | Standard | ||||
1.15 | 18 | ASTM F436 - 1/2, CW | 1.15 | Standard | ||||
1.16 | 1 | ASME B18.21.1 - 1/2 Extra-Duty. Lock Washers (Inch Series)Extra-Duty Helical Spring Lock Washer | 1.16 | Standard | ||||
1.17 | 1 | ANSI B18.5 - 1/2-13 UNC - 4, RHBI | 1.17 | Standard | ||||
1.18 | 1 | ANSI B18.5 - 1/2-13 UNC - 6, RHBI | 1.18 | Standard | ||||
1.19 | 4 | ANSI B18.6.4 - 6-20 - 1,5, SPHTSTBI | 1.19 | Standard | ||||
2 | 1 | FRAME | 2 | |||||
2.1 | 4 | FRAME SIDE | 2.1 | Production | ||||
2.2 | 4 | FRAME END | 2.2 | Production | ||||
2.3 | 1 | CENTER BLOCK | 2.3 | Production | ||||
2.4 | 4 | AIR DEFLECTOR | 2.4 | Production | ||||
2.5 | 2 | SCREEN STRIPS A | 2.5 | Production | ||||
2.6 | 4 | SCREEN STRIPS B | 2.6 | Production | ||||
2.7 | 1 | PLASTIC SCREEN | 2.7 | Production | ||||
2.8 | 1 | PIPE NIPLE | 2.8 | Production | ||||
2.9 | 1 | PERF METAL | 2.9 | Production | ||||