Angle grinder stand
From OHO - search engine for sustainable open hardware projects
Angle grinder stand Basic Data Category: Angle grinders URL (first publication): https://www.youtube.com/watch?v=l8SEEqtCDrc Keywords: grinder, angle, stand, diy, metal, machine, workshop, open source, cutting, disc License: CC BY-SA 4.0 Organization: OHO Project status: Active
Technical documentation Maturity of the project: prototype
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: Yes Bill of materials is published: Yes
yes yes
|
Technical documentation
Assembly instructions
Here are some plans with the assembly sets and pieces, which can be detailed at this link
Tests, practical applications
Type of test | Detail | Description | Status |
---|---|---|---|
Initial preparation | Anchoring | Securely anchor the equipment with clamps | - |
Grinder installation | Install the equipment in the clamp | - | |
Sample part | Cut an angle of 1 /4"*40 cm | - | |
Preparation | |||
Adjustments on assemblies (no load test) | Clamping of the angle grinder | Keep the handle of the equipment immobilized. | ✓ Done |
Apply moderate force on the grinding wheel, from side to side and from top to bottom. | |||
Press grip | Mount and tighten the sample firmly in the press at 90°. | ✓ Done | |
Attempt to remove the sample by hand, applying moderate force. | |||
Cut | Main test | Cutting only the edge of the sample (reflowing) | ✓ Done |
Loosen the press and adjust to 45°(check that the work piece is aligned with the cutting area). | |||
Make a 45° cut | |||
Accuracy of the result | Measurement of cuts | Remove the sample, to detail: | ✓ Done |
Appearance of the cut | |||
Accuracy of cutting angles |
+ General Reviews
Parts list
Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
---|---|---|---|---|---|---|---|---|
A1 | 1 | 3D views | ||||||
A2 | 1 | Exploded 3D views | ||||||
B | Parts list | |||||||
1.0 | 1 | Support | ||||||
1.1 | 1 | Seat | Production | Plate 1 1/2*3/16", A36 Steel | ||||
1.2 | 1 | Crossbar | Production | Plate 1 1/2*3/16", A36 Steel | ||||
1.3 | 1 | Side1 | Production | Plate 1 1/2*3/16", A36 Steel | ||||
1.4 | 1 | Side2 | Production | Plate 1 1/2*3/16", Stainless Steel A36 | ||||
1.5 | 1 | Extension1 | Production | Plate 1 1/2*3/16", Stainless Steel A36 | ||||
1.6 | 1 | Extension2 | Production | Plate 1 1/2*3/16", Steel A36 | ||||
1.7 | 2 | Rear stop | Standard | Hexagonal screw 3/8*2", Steel A36 | ||||
1.8 | 2 | Retaining screw | Standard | Hexagonal bolt 1/4*1". | ||||
1.9 | 1 | Retraction spring | Buy | Tension spring L: 90 mm, F 20 kg, D: 23mm | ||||
1.10 | 1 | Nut for handle | Standard | Hex nut 1/4", optional | ||||
2.0 | 1 | Base | ||||||
2.1 | 2 | Base frame1 | Production | 2*1" rectangular tube 14 gauge, A36 Steel | ||||
2.2 | 2 | Base frame2 | Production | Rectangular tube 2*1" 14 gauge, A36 Steel | ||||
2.3 | 2 | Guide base | Production | 1*1" 14-gauge rectangular tubing, A36 steel | ||||
2.4 | 1 | Fork1 | Production | Plate 1 1/2*3/16", A36 Steel | ||||
2.5 | 1 | Spring lug | Production | Angle 2*2*1/8", A36 Steel | ||||
2.6 | 1 | Articulation screw | Standard | Hex bolt 1/2*5", A36 Steel | ||||
2.7 | 2 | Articulation nut | Standard | Hex Nut 1/2 | ||||
2.8 | 2 | Base plate | Production | Sheet 3mm, Steel C45 | ||||
3.0 | 1 | Press mechanism | ||||||
3.1 | 1 | Power screw | Production | Threaded rod 1/2", A36 Steel | ||||
3.2 | 1 | Vice | Production | Rectangular pipe 2*1" 14 gauge, A36 Steel | ||||
3.3 | 1 | Vice holder | Production | 2*1" 14-gauge rectangular pipe, A36 Steel | ||||
3.4 | 1 | Press support | Production | Angle 1*1*1*-1/8", A36 Steel | ||||
3.5 | 1 | Handle | Production | 1/2" round bar, A36 Steel | ||||
3.6 | 4 | Stop nut | Standard | Hex Nut 5/16" Hex Nut | ||||
3.7 | 4 | Power nut | Standard | Hex Nut 1/2" Hex Nut | ||||
3.8 | 1 | Vise bolt | Standard | 5/16*3" Hex Bolt | ||||
3.9 | 2 | Jaw washer | Standard | Washer 3/8 | ||||
3.11 | 1 | Power Washer | Standard | Washer 1/2" Washer | ||||
4.0 | 1 | Adjustable stop | ||||||
4.1 | 1 | Stop | Production | Angle 1*1*1/8", Steel A36 | ||||
4.2 | 1 | Stop pivot guide | Production | Plate 1 1/2*3/16, Steel A36 | ||||
4.3 | 2 | Press screw | Standard | Hexagonal Screw 5/16*2 | ||||
4.4 | 4 | Press nut | Standard | Hex Nut 5/16" Hex Nut | ||||
4.5 | 2 | Press washer | Standard | Washer 3/8" | ||||