Solar Water Heater with Corrugated Metal Collector
Solar Water Heater with Corrugated Metal Collector Basic Data Category: Solar collectors Keywords: solar, water, heater, corrugated, metal, collector, diy, oho License: CC BY-SA 4.0 Organization: Ecotope Group Project status: Active Certification status: Approved Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
|
Technical documentation
Complete PDF plans | |
Files: |
CAD files | |
Files: |
Attestation | |
The project Solar Water Heater with Corrugated Metal Collector was reviewed by two reviewers from the OHO team. The review consisted of the following components:
1. Completeness check: Checks if all required documents have been submitted. 2. Review of the submitted documents: Checks if the information in the submitted documents is complete and correct. 2.1 Bill of materials - Are all parts and assemblies covered? - Are all quantities correct? - Are all required material specifications available? - Are all specifications for purchased parts and standard parts complete? 3.2 Technical drawings - Are all the required views available? - Are all required dimensional data available? 4.1 Suggestions for improvement Detail abot the review process: https://en.oho.wiki/wiki/Instructions_for_Reviewers Permanent Link: https://en.oho.wiki/index.php?title=Solar_Water_Heater_with_Corrugated_Metal_Collector&oldid=44307 | |
Files: |
+ General Reviews
Parts list
Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
---|---|---|---|---|---|---|---|---|
A1 | 1 | 3D-Views |
REV1: Approved |
|||||
A2 | 1 | explode 3D Views |
REV1: Approved |
|||||
B1 | Parts list |
REV1: Approved |
||||||
C1 | TECH NOTES |
REV1: Approved |
||||||
1.0 | 1 | Box |
REV1: Approved |
|||||
1.1 | 1 | Plywood sheet | Production | Plywood |
REV1: Approved |
|||
1.2 | 2 | Wood strip | Production | Wood |
REV1: Approved |
|||
1.3 | 2 | Wood long | Production | Wood |
REV1: Approved |
|||
1.4 | 3 | Wood Brace | Production | Wood |
REV1: Approved |
|||
1.5 | 4 | Fiberglass | Production | Glass wool 350 degC |
REV1: Approved |
|||
1.6 | 21 | Woodscrew | Standard | Woodscrew, Screw DIN 96 4x75 |
REV1: Approved |
|||
1.7 | 1/2 Lb. | Nail | Standard | Nail, D 4 x 32- Steel |
REV1: Approved |
|||
2.0 | 3 | Corrugated sheet | Production | Galvanized Steel |
REV1: Approved |
|||
3.0 | 1 | Manifold pipes |
REV1: Approved |
|||||
3.1 | 8 | Pipe 3/4 | Production | DN=3/4 in. rigid tubing typeM, Copper |
REV1: Approved |
|||
3.2 | 16 | Tee | Standard | Tee DN=3/4 in. rigid tubing, solder, Copper |
REV1: Approved |
|||
3.3 | 14 | Niple 3/4 | Production | DN=3/4in. rigid tubing, solder, Copper |
REV1: Approved |
|||
3.4 | 2 | 2do. niple3/4 | Production | DN=3/4 in. rigid tubing, solder, Copper |
REV1: Approved |
|||
3.5 | 2 | Hose adapter | Standard | Adapter DN=3/4 in.rigid tubing, solder, Copper |
REV1: Approved |
|||
4.0 | 1 | Frame Glazing |
REV1: Approved |
|||||
4.1 | 3 | Wood strip | Production | Wood |
REV1: Approved |
|||
4.2 | 2 | Wood strip long | Production | Wood |
REV1: Approved |
|||
4.3 | 2 | Wood strip | Production | Wood |
REV1: Approved |
|||
4.4 | 2 | Wood strip long | Production | Wood |
REV1: Approved |
|||
4.5 | 2 | Neoprene gasket | Production | Rubber |
REV1: Approved |
|||
4.6 | 3 | Neoprene gasket | Production | Rubber |
REV1: Approved |
|||
4.7 | 1 | Glasing sheet | Production | thicknes=5,0 , Glass |
REV1: Approved |
|||
4.8 | 2 | Angle lateral | Production | rolled angle 2x3 thickness=2,5, Steel A36 |
REV1: Approved |
|||
4.9 | 1 | Angle short | Production | rolled angle 2x3 thinckess: 2,5, Steel A36 |
REV1: Approved |
|||
4.10 | 6 | Mirror clip | Production | Steel C45 |
REV1: Approved |
|||
4.11 | 12 | Woodscrew12.ipt | Standard | Woodscrew12.ipt, DIN 96 4x20 |
REV1: Approved |
|||
4.12 | 20 | Woodscrew8 | Standard | Woodscrew8, Screw DIN 96 4x20 |
REV1: Approved |
|||