Difference between revisions of "Savonius Rotor with Two Blade Levels"
From OHO - search engine for sustainable open hardware projects
| Line 51: | Line 51: | ||
|cmptitle=CAD files | |cmptitle=CAD files | ||
|cmpimage=Hs srl savonius-rotor-two-level 0001.jpg | |cmpimage=Hs srl savonius-rotor-two-level 0001.jpg | ||
|cmpfile1=Hs srl CAD-files.zip | |||
|cmpfile2=Hs srl DWG-files.zip | |||
|cmpfile3=Hs srl STP-files.zip | |||
}} | }} | ||
|Materials={{ProjektMaterials | |Materials={{ProjektMaterials | ||
Revision as of 06:27, 27 November 2021
|
Savonius Rotor with Two Blade Levels Basic Data Category: Savonius wind turbines Keywords: savonius, rotor, two, blade, levels, diy, oho License: CC BY-SA 4.0 Organization: Heinz Schulz Project status: Active Certification status: In process Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
|
Technical documentation
Complete PDF plans | |
|
|
Files: | |
CAD files | |
|
|
Files: | |
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A1 | 1 | 3D views | |
|||||
| A2 | 1 | 3D Explode | |
|||||
| B1 | Parts list | |
||||||
| C1 | Technical notes | |
||||||
| 1.0 | 1 | Rotor | |
|||||
| 1.1 | 4 | Sheet | Production | Steel C45 | |
|||
| 1.2 | 3 | Plates plywood | Production | Plywood | |
|||
| 1.3 | 20 | Roller shutter | Production | Steel C45 | |
|||
| 1.4 | 3 | Flange support | Production | Steel C45 | |
|||
| 1.5 | 1 | Tube central | Production | Schd 40, ASTM A36 | |
|||
| 1.6 | 1 | Shaft support | Production | Pipe Schd 40, Steel C45 | |
|||
| 1.7 | 1 | Shaft upper | Production | Steel C45 | |
|||
| 1.8 | 1 | Shaft middle | Production | Steel C45 | |
|||
| 1.9 | 4 | Clamping-bar | Production | Steel C45 | |
|||
| 1.10 | 180 | Bolt plate | Standard | Bolt plate, Hex M6 DIN-934 | |
|||
| 1.11 | 180 | Nut plate | Standard | Nut plate, Hex M6 DIN-934 | |
|||
| 1.12 | 4 | Bolt Shaft | Standard | Bolt Shaft, Hex M10 DIN-934 | |
|||
| 1.13 | 4 | Nut Shaft | Standard | Nut Shaft, Hex M10 DIN-934 | |
|||
| 2.0 | 1 | Frame | |
|||||
| 2.1 | 2 | Pole vertical | Production | Schd 40, ASTM A36 | |
|||
| 2.2 | 1 | Pole long horzt | Production | Schd 40, ASTM A36 | |
|||
| 2.3 | 1 | Pole short horzt | Production | Schd 40, ASTM A36 | |
|||
| 2.4 | 2 | Pipe a 45� | Production | Schd 40, ASTM A36 | |
|||
| 2.5 | 1 | Support generator | Production | Sheet metal t:3mm, ASTM A36 | |
|||
| 2.6 | 2 | Base bearing | Production | ASTM A36 | |
|||
| 2.7 | 2 | Flange Bearing | Standard | Flange Bearing, square flange UCF206D1 | |
|||
| 2.8 | 2 | Flange axial Bearin | Standard | Flange axial bearing, UCF207D1 | |
|||
| 2.9 | 12 | Bolt for bearing | Standard | Bolt for bearing, Hex M10 DIN-934 | |
|||
| 3.0 | 1 | Transmission | |
|||||
| 3.1 | 1 | Working Shaft | Production | Schd 40, ASTM A36 | |
|||
| 3.2 | 1 | Shaft support | Production | Steel C45 | |
|||
| 3.3 | 1 | Shaft lower | Production | Steel C45 | |
|||
| 3.4 | 1 | Base motor | Steel C45 | |
||||
| 3.5 | 1 | Fly wheel small | Standard | Fly wheel small, D: 75.0 x 1 | |
|||
| 3.6 | 1 | Fly wheel medium | Standard | Fly wheel medium, D:150 x1 | |
|||
| 3.7 | 1 | Belt trans | Standard | Belt trans, type V | |
|||
| 3.8 | 1 | Generator | Standard | Generator | |
|||
| 3.9 | 4 | Bolt 1 | Standard | Bolt 1, Hex M10 x 50 DIN 934 | |
|||
| 3.10 | 3 | Bolt 2 | Standard | Bolt 2, Hex M10 x 70 DIN 934 | |
|||
| 3.11 | 7 | Nut | Standard | Nut, Hex M10 DIN 934 | |
|||
| 4.0 | 4 | Tensioner | Production | |
||||
| 4.1 | 4 | . Angle25 | Production | ASTM A36 | |
|||
| 4.2 | 4 | Turnbuckles | Standard | Turnbuckles, tensioner for guy of 6 mm | |
|||
| 4.3 | 8 | Rulldog grips | Standard | Rulldog grips, Grip 4 mm to 12mm cap. include nut and washer | |
|||
| 4.4 | 4 | guy wire | Production | wire of D: 6mm - total:4,60 m, Galvanized steel | |
|||
| 5.0 | 1 | Parking brake | |
|||||
| 5.1 | 1 | Break arm | Production | Steel C45 | |
|||
| 5.2 | 2 | Arm pivote | Standard | Steel C45 | |
|||
| 5.3 | 1 | Arm pivote2 | Production | Steel C45 | |
|||
| 5.4 | 1 | Grader plate | Production | Production Steel C45 | |
|||
| 5.5 | 1 | Brake cable | Production | Production guy L:2,20 m, Galvanized steel | |
|||
| 5.6 | 2 | Rulldog grips | Standard | Standard Rulldog grips, for guy D:6.0mm | |
|||
| 5.7 | 1 | Spring | Standard | Standard Spring, 20x90x4 | |
|||
| 5.8 | 1 | Bolt pin | Standard | Standard Bolt pin | |
|||