Zigzag Solar water heater
|
Zigzag Solar water heater Basic Data Category: Solar collectors URL (first publication): https://www.wot.utwente.nl/publications/zigzag.pdf Keywords: zigzag, solar energy, heater, water, sustainable, boiling, communities License: CC BY-SA 4.0 Organization: WOT Project status: Active Certification status: In process Technical documentation Maturity of the project: prototype
Contains PDF-drawings: Yes Assembly instructions are published: Yes Bill of materials is published: Yes
yes yes
|
|
Description
Blueprints and instructions for the construction of a solar water heater
Based on manual published by WOT. It may be helpful in constructing solar collectors and building hot water systems especially for communities using large quantities of hot water.
This project is published under the terms of the CC-BY-SA licence.
Technical documentation
PDF Plans | |
|
|
Files: | |
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A1 | zigzag solar water heater | A1 | |
|||||
| A2 | zigzag solar water heater | A2 | |
|||||
| B | Part list | B |
REV1: Action required |
|
||||
| 1.0 | 3 | The Absorber | 1 | |
||||
| 1.1 | 3 | 1/2" galvanised pipe | 1.1 | Production | galvanised iron | |
||
| 1.2 | 3 | galvanised sheet | 1.2 | Production | One 1.22*2.44 sheet | |
||
| 1.3 | 16 | saddles | 1.3 | Production | 0.5 mm, galvanised sheet |
REV1: Action required |
|
|
| 1.4 | 64 | rivets 9,4 x 18 | 1.4 | Standard | rivets 9,4 x 18 expand |
REV1: Action required |
|
|
| 2.0 | 3 | collector-box | 2 | |
||||
| 2.1 | 6 | sides planks | 2.1 | Production | pine wood or similar | |
||
| 2.2 | 6 | front planks | 2.2 | Production | pine wood or similar | |
||
| 2.3 | 6 | supporting laths | 2.3 | Production | pine wood or similar | |
||
| 2.4 | 3 | bottom plank | 2.4 | Production | pine wood or similar | |
||
| 2.5 | 3 | insulating material | 2.5 | Production | For thermal insulation material, the following can be used, among others:
- polystyrene, - fiberglass, - empty bags of fibre with sawdust, - Coconut-fibre.With good radiation and thermal insulation, the system can produce water between 40 and 70 °C. | |
||
| 2.6 | 3 | cover glass | 2.6 | Production | 4 mm glass | |
||
| 2.7 | 8 | rubber strip | 2.7 | Production | rubber |
REV1: Action required |
|
|
| 2.8 | 3 | angle section | 2.8 | Production | Angle section aluminum 25x25x3; L: 1180 | |
||
| 3.0 | 1 | insulated storage tank | 3 | |
||||
| 3.1 | 1 | storage tank | 3.1 | Standard | 200-litredrum |
REV1: Action required |
|
|
| 3.2 | 4 | galvanised pipe 1/2" | 3.2 | Production | galvanised iron | |
||
| 3.3 | 2 | galvanised pipe 3/4" | 3.3 | Production | galvanised iron | |
||
| 3.4 | 1 | insulating material | 3.4 | Production | For thermal insulation material, the following can be used, among others:
- polystyrene, - fiberglass, - empty bags of fibre with sawdust, - Coconut-fibre.With good radiation and thermal insulation, the system can produce water between 40 and 70 °C. | |
||
| 4.0 | the buffer tank | 4 | |
|||||
| 4.1 | 1 | storage tank | 4.1 | Standard | half 200-litre drum |
REV1: Action required |
|
|
| 4.2 | 3 | galvanised pipe 1/2" | 4.2 | Production | galvanised iron | |
||
| 4.3 | 1 | floating gauge | 4.3 | Standard | |
|||
| 5.0 | 1 | foundation storage tank | 5 | |
||||
| 5.1 | 4 | steel-pipe 50x50x500 | 5.1 | Production | steel A36 | |
||
| 5.2 | 2 | steel-pipe 50x50x600 | 5.2 | Production | steel A36 | |
||
| 5.3 | 2 | steel-pipe 50x50x800 | 5.3 | Production | steel A36 | |
||
| 5.4 | 2 | steel-pipe 50x50x1050 | 5.4 | Production | steel A36 | |
||
| 5.5 | 4 | steel-pipe 50x50x1800 | 5.5 | Production | steel A36 | |
||
| 5.6 | 6 | rectangular flancher | 5.6 | Production | steel C45 | |
||
| 6.0 | 1 | base collector | 6 | |
||||
| 6.1 | 2 | steel-pipe 50x50x330 | 6.1 | Production | steel A36 | |
||
| 6.2 | 2 | steel-pipe 50x50x600 | 6.2 | Production | steel A36 | |
||
| 6.3 | 2 | steel-pipe 50x50x800 | 6.3 | Production | steel A36 | |
||
| 6.4 | 2 | steel-pipe 50x50x2300 | 6.4 | Production | steel A36 | |
||
| 7.0 | pipe fitting and accesories | 7 | |
|||||
| 7.1 | 6 | galvanised pipe 1/2" x 450 | 7.1 | Standard | galvanised iron | |
||
| 7.2 | 3 | galvanised pipe 1/2" x 600 | 7.2 | Standard | galvanised iron | |
||
| 7.3 | 2 | galvanised pipe 1/2" x 830 | 7.3 | Standard | galvanised iron | |
||
| 7.4 | 10 | galvanised elbow 1/2"-90° | 7.4 | Standard | galvanised iron | |
||
| 7.5 | 4 | galvanised tee 1/2"-90° | 7.5 | Standard | galvanised iron | |
||