Vertical Axis Sail Windmill - Diameter 3 m
|
Vertical Axis Sail Windmill - Diameter 3 m Basic Data Category: Savonius wind turbines Keywords: vertical, axis, sail, windmill, diy, oho License: CC BY-SA 4.0 Organization: Low Energy Systems Project status: Active Certification status: In process Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
|
Technical documentation
Complete PDF plans | |
|
|
Files: | |
CAD files | |
|
|
Files: | |
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A1 | 1 | 3d views |
REV1: Approved |
|
||||
| A2 | Exploded 3d view |
REV1: Approved |
|
|||||
| B1 | Parts list |
REV1: Approved |
|
|||||
| C1 | Technical notes |
REV1: Approved |
|
|||||
| 1.0 | 1 | Tower |
REV1: Approved |
|
||||
| 1.1 | 1 | Timber 5.5m | Production | Wood |
REV1: Approved |
|
||
| 1.2 | 1 | Timber 3.7m | Production | Wood |
REV1: Approved |
|
||
| 1.3 | 4 | Brackets | Production | Steel C45 |
REV1: Approved |
|
||
| 1.4 | Tower bolt | Standard | Tower bolt |
REV1: Approved |
|
|||
| 1.5 | 20 | Tower nut | Standard | Tower nut, M10 |
REV1: Approved |
|
||
| 1.6 | 20 | Towr Washer | Standard | Towr Washer, M20 |
REV1: Approved |
|
||
| 1.7 | 16 | Tower bolt piercing | Standard | Tower bolt piercing, M10 x 100 |
REV1: Approved |
|
||
| 1.8 | 2 | Towe eye bolt | Standard | Towe eye bolt, M8 x 12 x 150 |
REV1: Approved |
|
||
| 2.0 | 6 | Tenioner |
REV1: Approved |
|
||||
| 2.1 | 8 | Guy wire | Production | wire of D: 6mm - total:42,0 m, Galvanized steel |
REV1: Approved |
|
||
| 2.2 | 16 | Bulldog grips | Standard | Bulldog grips, Grip 4 mm to 12mm cap., include nut and washers |
REV1: Approved |
|
||
| 2.3 | 8 | Turnbuckles | Standard | Turnbuckles, tensioner for guy of 6 mm |
REV1: Approved |
|
||
| 2.4 | 8 | Angle25 | Production | ASTm A36 |
REV1: Approved |
|
||
| 3.0 | 2 | Foundation | Production | Sheet of 10mm, Steel C45 |
REV1: Approved |
|
||
| 4.0 | 4 | Sail frame | Production | 3m lengths of galvanised conduit D:20mm - Std, Steel Galvanized |
REV1: Approved |
|
||
| 5.0 | 8 | Rotor arm |
REV1: Approved |
|
||||
| 5.1 | 8 | Arms | Production | Galvanized Steel |
REV1: Approved |
|
||
| 5.2 | 8 | Keeklamps | Standard | Keeklamps, 1/2" - will fit 20mm conduit, Plastic |
REV1: Approved |
|
||
| 5.3 | 16 | Rotor bolt | Standard | Rotor bolt |
REV1: Approved |
|
||
| 6.0 | 1 | Axle |
REV1: Approved |
|
||||
| 6.1 | 1 | Axle | Production | Steel C45 |
REV1: Approved |
|
||
| 6.2 | 2 | Steel plate | Production | Steel C45 |
REV1: Approved |
|
||
| 6.3 | 2 | Bearing | Standard | Bearing , D: 25,0 - UCP type - bridge type bearings with set screw |
REV1: Approved |
|
||
| 6.4 | 16 | Axle bolt 1 | Standard | Axle bolt 1, M6 x 40 DIN 933 |
REV1: Approved |
|
||
| 6.5 | 16 | Axle nut 1 | Standard | Axle nut 1, M6 DIN 934 |
REV1: Approved |
|
||
| 6.6 | 16 | Axle Washer 1 | Standard | Axle Washer 1, D: 6,0 |
REV1: Approved |
|
||
| 6.7 | 8 | Axle bolt 2 | Standard | Axle bolt 2, M10 x 130 DIN 933 |
REV1: Approved |
|
||
| 6.8 | 4 | Axle nut 2 | Standard | Axle nut 2, M6 DIN 934 |
REV1: Approved |
|
||
| 6.9 | 4 | Axle washer 2 | Standard | Axle washer 2, D: 10 |
REV1: Approved |
|
||
| 7.0 | 4 | Sail |
REV1: Approved |
|
||||
| 7.1 | 4 | Sail | Production | e=2,0mm, canva of linen or synthetic |
REV1: Approved |
|
||
| 7.2 | 8 | Cord | Standard | Cord, 550 mm longt, cord 6mm 3 twisted, Prolypropylene |
REV1: Approved |
|
||
| 7.3 | 8 | Eyelet | Standard | Eyelet, snap eyelet for canva D:8mm, Bronce |
REV1: Approved |
|
||