Tube Bender with 20 Ton Jack
From OHO - search engine for sustainable open hardware projects
|
Tube Bender with 20 Ton Jack Basic Data Category: Tube benders Keywords: tube, bender, diy, oho License: CC BY-SA 4.0 Project status: Active Certification status: In process Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
|
Technical documentation
Complete PDF plans | |
|
|
Files: | |
CAD files | |
|
|
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A1 | 1 | 3d views | |
|||||
| A2 | 1 | Exploded 3d view | |
|||||
| B1 | Parts list | |
||||||
| 1.0 | 1 | Support assembly | |
|||||
| 1.1 | 2 | Stand plate | Production | Steel C45 | |
|||
| 1.2 | 1 | Base plate | Production | Steel C45 | |
|||
| 1.3 | 2 | Side bracket | Production | Aluminium T6 6061 | |
|||
| 1.4 | 1 | Roller pin | Production | Steel C45 | |
|||
| 1.5 | 1 | Speed nut wing | Production | Steel C45 | |
|||
| 1.6 | 2 | Stabilizer tube | Buy | Steel A36, Tubular structural DIN 10220 s. (OD=0.75", ID=0.5", L=7") | |
|||
| 1.7 | 1 | Die wrist pin sleeve | Buy | Steel A36, Tubular structural DIN 10220 s. (OD=1.5", ID= 1", L=7") | |
|||
| 1.8 | 2 | Spring D.Wire 3mm | Buy | Spring Steel C45, ( D.wire = 3mm, L=140mm, D1.=25 mm) | |
|||
| 1.9 | 1 | Hex Bolt M24 | Standard | M24-3.00x230mm Hex Bolt DIN 931 | |
|||
| 1.10 | 2 | Washer M24 | Standard | M24 Flat washer DIN 125 | |
|||
| 1.11 | 2 | Bolt 2 | Standard | M12-1.50 x230mm Hex Bolt DIN 931 | |
|||
| 1.12 | 4 | Bolt 4 | Standard | M10-1.5- 35mm SHCS Bolt DIN 933 | |
|||
| 1.13 | 4 | Washer 4 | Standard | M10 Flat Washer DIN 125 | |
|||
| 1.14 | 2 | Nut 2 | Standard | M12 - 1.50 Nylon Lock Nut DIN 934 | |
|||
| 1.15 | 4 | Nut 3 | Standard | M10 - 1.50 Hex Nut DIN 934 | |
|||
| 1.16 | 4 | Bolt 3 | Standard | M12- 1.50x 25mm Hex Bolt DIN 933 | |
|||
| 1.17 | 8 | Washer 3 | Standard | M12 Flat Washer DIN125 | |
|||
| 1.18 | 1 | Hex Nut M24 | Standard | M24 - 3.00 Hex Nut DIN 934 | |
|||
| 2.0 | 1 | Pressing system | |
|||||
| 2.1 | 1 | HMP-Jack | Buy | 20 Ton Bottle Jack | |
|||
| 2.2 | 1 | Spacer Sleeve-Shipping | Production | Steel A36, Tubular structural DIN 10220 seamless 40x2mm | |
|||
| 2.3 | 1 | Roller block | Production | Aluminum 6061-T6 | |
|||
| 2.4 | 1 | Roller | Production | Steel C45 | |
|||
| 2.5 | 1 | Support bracket | Production | Steel C45 | |
|||
| 2.6 | 2 | Washer 5 | Standard | M10 Flat Washer DIN 125l | |
|||
| 2.7 | 2 | Hex Bolt 5 | Standard | M10 - 1.50 x 25 mm SHCS Bolt DIN 933 | |
|||
| 3.0 | 1 | Die set w/ Follow Bar | Buy (Round tube dir for pipe bender 2" O.D.) Pro-Tools, Incs. | |
||||