Difference between revisions of "Tantillus 2"

From OHO - search engine for sustainable open hardware projects
m
 
(4 intermediate revisions by one other user not shown)
Line 1: Line 1:
{{Projekt
{{Projekt
|projectname=Tantillus 2
|projectnameES=Tantillus
|projectnameDE=Tantillus 3
|kewords=3D printer
|subcat=3D printer
|Images={{ProjektImages
|Images={{ProjektImages
|projectimage=TUB.188.1.gif
|projectimage=TUB.188.1.gif
Line 12: Line 7:
|projectimage=TUB.188.3.gif
|projectimage=TUB.188.3.gif
}}
}}
|subcat=3D printer
|projectname=Tantillus 2
|projectnameES=Tantillus
|projectnameDE=Tantillus 3
|kewords=3D printer
|firstin=http://tantillus.x10host.com/OldHome.html
|firstin=http://tantillus.x10host.com/OldHome.html
|desc=After participating in the (http://reprap.org/wiki/RepRap RepRap) project for almost two years and travelling with my Prusa Mendel, I found the need for a more portable, less fragile printer. I began by designing the fully printable Tantillus seen below.Immediately after pictures of the original Tantillus were released to the public, I was inundated with requests for finished parts. Realizing there was a demand for a small portable printer and that the demand could not be kept up with through the printing of the entire case, I proceeded to design a simpler version using laser cut panels and printed connectors. The result is what you will find documented here.Both printers use the same electronics and share all the same printed parts for the Extruder, X, Y and Z axis. So once you have assembled one version you will be able to build the other with ease. This also means if you have a Laser cut version and a Printed version you can swap parts without compatibility issues.
|desc=After participating in the (http://reprap.org/wiki/RepRap RepRap) project for almost two years and travelling with my Prusa Mendel, I found the need for a more portable, less fragile printer. I began by designing the fully printable Tantillus seen below.Immediately after pictures of the original Tantillus were released to the public, I was inundated with requests for finished parts. Realizing there was a demand for a small portable printer and that the demand could not be kept up with through the printing of the entire case, I proceeded to design a simpler version using laser cut panels and printed connectors. The result is what you will find documented here.Both printers use the same electronics and share all the same printed parts for the Extruder, X, Y and Z axis. So once you have assembled one version you will be able to build the other with ease. This also means if you have a Laser cut version and a Printed version you can swap parts without compatibility issues.
|licence=GNUGPL
|typeproject=TUBerlin
|typeproject=TUBerlin
|project_status=active
|project_status=active
|maturity=PDIY
|maturity=PDIY
|product_category=Electronics
|open_o_meter=5
|design_files_pub=yes
|design_files_pub=yes
|cad_files_editable=yes
|cad_files_editable=yes
|is_cad_editable=no
|mechanical_licence=GNUGPL
|assembly_inst_pub=yes
|assembly_inst_pub=yes
|assembly_instructions_editable=no
|assembly_instructions_editable=yes
|bill_materials_pub=yes
|bill_materials_pub=yes
|bill_materials_editable=no
|bill_materials_editable=yes
|contributing_guide_pub=no
|contributing_guide_pub=no
|issue_management_system=yes
|issue_management_system=yes
|versioning_system=yes
|versioning_system=yes
|original_non_elect_h=no
|certificate_requested=No
|original_elect_h=no
|product_category=Electronics
|original_soft=no
|free_redist_allowed_licence=yes
}}
}}

Latest revision as of 07:34, 10 November 2021


Tantillus 2

Basic Data

Category: 3D printer

URL (first publication): http://tantillus.x10host.com/OldHome.html

Keywords: 3D printer

License: GNU GPL

Project status: Active


Technical documentation

Maturity of the project: production / DIY


CAD files are editable: Yes

Assembly instructions are published: Yes

Bill of materials is published: Yes







yes

yes yes



Project management


Open-o-meter: 7

Product category: Electronics


TUB.188.1.gif

Description

After participating in the (http://reprap.org/wiki/RepRap RepRap) project for almost two years and travelling with my Prusa Mendel, I found the need for a more portable, less fragile printer. I began by designing the fully printable Tantillus seen below.Immediately after pictures of the original Tantillus were released to the public, I was inundated with requests for finished parts. Realizing there was a demand for a small portable printer and that the demand could not be kept up with through the printing of the entire case, I proceeded to design a simpler version using laser cut panels and printed connectors. The result is what you will find documented here.Both printers use the same electronics and share all the same printed parts for the Extruder, X, Y and Z axis. So once you have assembled one version you will be able to build the other with ease. This also means if you have a Laser cut version and a Printed version you can swap parts without compatibility issues.


+ General Reviews General Reviews


Report this page


OPEN HARDWARE OBSERVATORY 2020
| |
|||