Talk:Wood Turning Lathe

From OHO - search engine for sustainable open hardware projects

-- Thehunter (talk) 10:59, 7 April 2021 (CEST)

please change license to CC-BY-SA 4.0

-- Thehunter (talk) 11:02, 7 April 2021 (CEST)

the material specifications "steel metal" are too unspecific, I assume that "steel A36" should be used for these components, is that correct?

Part number 2.1 -- Thehunter (talk) 11:10, 7 April 2021 (CEST)

The belt guard consists of several components, the perimeter plate and the cover plate. In the case of the cover plate, it must be specified whether it is to be a finished perforated plate (perforated plate). In addition, information is missing on the minimum and maximum diameter of the holes, as well as information on what percentage of the area of the cover plate is to be perforated. However, this information is not mandatory because the belt guard is not a critical component.

OPEN HARDWARE OBSERVATORY 2020
| |
|||