Talk:Tricycle cargo bike

Part number B1 -- Xtech2020 review (talk) 02:05, 3 March 2021 (CET)

You can add some basic dimensions in the specifications, such as the length of the tubes.

Re: Part number B1 -- Inddigital (talk) 01:29, 10 April 2021 (CEST)

Ok, I could add it in an enhancement, for this case, the lengths were placed directly on the plans.

Part number 1.3 -- Xtech2020 review (talk) 02:19, 3 March 2021 (CET)

Do you have a reference model or brand for the size of this part? You could use this guide: https://www.statebicycle.com/pages/size-chart

Re: Part number 1.3 -- Inddigital (talk) 01:27, 10 April 2021 (CEST)

A frame size of 26 inches was used

Part number 1.1 -- Xtech2020 review (talk) 02:46, 3 March 2021 (CET)

test

Part number 1.3 -- Thehunter (talk) 13:16, 7 April 2021 (CEST)

Here you could still enter whether it is a 26 inch frame or a 28 inch frame

Re: Part number 1.3 -- Inddigital (talk) 01:27, 10 April 2021 (CEST)

A 26-inch frame size was used, the specification was added in the parts list.

-- Thehunter (talk) 13:18, 7 April 2021 (CEST)

complete with the title block of the plans under the logo " Workshop cargo bik

Re: -- Inddigital (talk) 01:05, 10 April 2021 (CEST)

The logo has been modified

-- Thehunter (talk) 13:18, 7 April 2021 (CEST)

please change license to CC-BY-SA 4.0

Re: -- Inddigital (talk) 01:23, 10 April 2021 (CEST)

Done

-- Thehunter (talk) 13:20, 7 April 2021 (CEST)

I assume that all connections between components that are not bolted are welded, is that correct?

Re: -- Inddigital (talk) 01:24, 10 April 2021 (CEST)

Correct, an annotation was added in this regard

-- Thehunter (talk) 13:20, 7 April 2021 (CEST)

In the parts list the specific bicycle components are missing, such as brakes, ground cables, light system etc. but this results firstly from the various specific requirements, for example if the cargo bike is to transport larger loads drum brakes or disc brakes are recommended, so that these specific bicycle components must be adapted depending on the project. The parts list is therefore ok.

Re: -- Inddigital (talk) 01:25, 10 April 2021 (CEST)

Ok, thanks for the observation, it is very useful for improved versions.

-- Xtech2020 review (talk) 00:13, 8 April 2021 (CEST)

From the way the design seems to be conceived, it would not be mandatory but I recommend adding standard parts such as wheels and seat in their corresponding assemblies.

Re: -- Inddigital (talk) 01:26, 10 April 2021 (CEST)

Well, in any case, those elements were not in the scope of the initial project, I can include them in an improved version.