Difference between revisions of "Talk:Solar Water Heater with Serpentine Collector"

Revision as of 23:58, 5 January 2022

Include weld joining details.

Consider separating the pieces.

Indicate the thickness of the part.

Indicate the thickness of the part.

Indicate the thickness of the part.

Indicate pipe diameter

Indicate pipe diameter

Consider including technical details on the operation of the project.

Could add weld types and methodology information.

It is suggested to place two containers, one containing the fluid at room temperature and the other containing the fluid obtained at high temperature. This is because if both fluids are mixed in the same container, the efficiency of the Solar Water Heater is lost.

The curves and descents in the pipes are subtracting energy to the fluid therefore the system needs a pump that provides the impulse for the circulation of the water.

@@ Line 34: / Line 34: @@
 Could add weld types and methodology information.
+==  -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 22:58, 5 January 2022 (CET) ==
+* It is suggested to place two containers, one containing the fluid at room temperature and the other containing the fluid obtained at high temperature. This is because if both fluids are mixed in the same container, the efficiency of the Solar Water Heater is lost.
+* The curves and descents in the pipes are subtracting energy to the fluid therefore the system needs a pump that provides the impulse for the circulation of the water.