Difference between revisions of "Talk:Long Andre cargo bike"

From OHO - search engine for sustainable open hardware projects
(→‎-- ~~~~: new section)
Line 35: Line 35:


When parking the bicycle, is it not necessary to have, for example, articulated legs to keep the load stable?
When parking the bicycle, is it not necessary to have, for example, articulated legs to keep the load stable?
== Part number 1 -- [[User:Xtech2020 review|Xtech2020 review]] ([[User talk:Xtech2020 review|talk]]) 23:56, 7 April 2021 (CEST) ==
This assembly is missing some standard parts: wheels, seat and handlebar.

Revision as of 22:56, 7 April 2021

-- Thehunter (talk) 10:18, 7 April 2021 (CEST)

please change license to CC-BY-SA 4.0

Part number 1.5 -- Thehunter (talk) 10:40, 7 April 2021 (CEST)

Here you could still enter whether it is a 26 inch frame or a 28 inch frame

-- Thehunter (talk) 10:41, 7 April 2021 (CEST)

material specifications are missing for almost all components

-- Thehunter (talk) 10:50, 7 April 2021 (CEST)

have just seen that the material details are available on the drawing sheets, so from there it is o.k., material details in the parts list would be nice, but are not mandatory

Part number 1.5 -- Thehunter (talk) 10:42, 7 April 2021 (CEST)

I assume that the frame must be steel so that it can be welded to the other components, is that correct?

if the outer diameter of the tube in which the wheel bearing is located is other than 39mm, this part must be adjusted accordingly

-- Thehunter (talk) 10:47, 7 April 2021 (CEST)

I assume that all connections between components that are not bolted are welded, is that correct?

-- Thehunter (talk) 10:54, 7 April 2021 (CEST)

In the parts list the specific bicycle components are missing, such as brakes, ground cables, light system etc. but this results firstly from the various specific requirements, for example if the cargo bike is to transport larger loads drum brakes or disc brakes are recommended, so that these specific bicycle components must be adapted depending on the project. The parts list is therefore ok.

-- Xtech2020 review (talk) 23:45, 7 April 2021 (CEST)

I think you should raise the fork position a little, as it is, the load would tilt slightly backwards, this implies that you should also modify the crossover setting.

-- Xtech2020 review (talk) 23:49, 7 April 2021 (CEST)

When parking the bicycle, is it not necessary to have, for example, articulated legs to keep the load stable?

Part number 1 -- Xtech2020 review (talk) 23:56, 7 April 2021 (CEST)

This assembly is missing some standard parts: wheels, seat and handlebar.

OPEN HARDWARE OBSERVATORY 2020
| |
|||