Difference between revisions of "Talk:Horizontal Shaft Turbine With Security Tail"

From OHO - search engine for sustainable open hardware projects
(→‎-- ~~~~: new section)
Line 12: Line 12:
* It is suggested that the horizontal axis of the turbine be lubricated with grease that resists dust and water.
* It is suggested that the horizontal axis of the turbine be lubricated with grease that resists dust and water.
* The dimensions should not interfere with the technical lines.
* The dimensions should not interfere with the technical lines.
== Part number B1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 02:34, 7 January 2022 (CET) ==
* Verify thickness of 1.3 on drawing shows 4mm.
* 1.5 is not shown in the exploded view on page 8.
* Verify several pos indicating 3.6, continue sequence

Revision as of 02:34, 7 January 2022

Part number 4.0 -- Dmosquera1968 (talk) 14:20, 22 December 2021 (CET)

It could inform the location of the land where it will be installed. Excavatons and other

Part number C1 -- Jeefri (talk) 17:58, 4 January 2022 (CET)

Does not require wood treatment.

-- Jaimerosciano (talk) 02:32, 7 January 2022 (CET)

  • Indicate the base where it will be installed, preferably concrete.
  • It is suggested that the horizontal axis of the turbine be lubricated with grease that resists dust and water.
  • The dimensions should not interfere with the technical lines.

Part number B1 -- Jaimerosciano (talk) 02:34, 7 January 2022 (CET)

  • Verify thickness of 1.3 on drawing shows 4mm.
  • 1.5 is not shown in the exploded view on page 8.
  • Verify several pos indicating 3.6, continue sequence
OPEN HARDWARE OBSERVATORY 2020
| |
|||