Talk:Cutting shears

-- Xtech2020 review (talk) 02:55, 7 April 2021 (CEST)

Please use the formats set out in Technical Drawings, especially in the Parts List

Part number 1.0 -- Xtech2020 review (talk) 03:07, 7 April 2021 (CEST)

Since there are welded elements, you can include a view showing the respective welding symbols (cut beads or caterpillar style)

Re: Part number 1.0 -- Inddigital (talk) 23:07, 8 April 2021 (CEST)

Yes, because that involves modifying the number of plans, I will make that change in an improved version of the project.

Part number 1.1 -- Xtech2020 review (talk) 03:14, 7 April 2021 (CEST)

Specify the material more, you can apply the steels indicated here.

Re: Part number 1.1 -- Inddigital (talk) 23:08, 8 April 2021 (CEST)

Done, thanks for the reference

Part number 1.6 -- Xtech2020 review (talk) 03:23, 7 April 2021 (CEST)

Indicate the structural profile in the parts list

Re: Part number 1.6 -- Inddigital (talk) 23:09, 8 April 2021 (CEST)

Done

Part number 1.7 -- Xtech2020 review (talk) 03:28, 7 April 2021 (CEST)

Will this part need to be machined? Looks like a tall nut could be used instead

Re: Part number 1.7 -- Inddigital (talk) 23:11, 8 April 2021 (CEST)

Yes, a tall nut could be used, but I prefer this way since the material must be purchased for other parts and it consumes little, plus it is possible that a nut with that thickness will not be located quickly.

Part number 2.1 -- Xtech2020 review (talk) 03:35, 7 April 2021 (CEST)

Indicate the surface treatment for hardening the steel.

Re: Part number 2.1 -- Inddigital (talk) 23:12, 8 April 2021 (CEST)

Done, quenching and tempering at specified temperatures

Part number 3.3 -- Xtech2020 review (talk) 03:38, 7 April 2021 (CEST)

For better ergonomics, you can smooth the edges where the lever will be manipulated

Re: Part number 3.3 -- Inddigital (talk) 23:14, 8 April 2021 (CEST)

Ok, I'll keep it in mind for an improved version.

Part number 2.2 -- Thehunter (talk) 09:44, 7 April 2021 (CEST)

here a special steel must be used, it is also possible to use steel from the leaf springs of cars, if we have the appropriate strength

Re: Part number 2.2 -- Inddigital (talk) 23:13, 8 April 2021 (CEST)

Correct, it was specified to use the material you indicate.

-- Thehunter (talk) 09:48, 7 April 2021 (CEST)

material specifications are missing for almost all components

Re: -- Inddigital (talk) 23:04, 8 April 2021 (CEST)

Solved

-- Thehunter (talk) 09:50, 7 April 2021 (CEST)

please change license to CC-BY-SA 4.0

Re: -- Inddigital (talk) 23:04, 8 April 2021 (CEST)

Done

-- Thehunter (talk) 09:51, 7 April 2021 (CEST)

please ad some recomendations for surface treatment

Re: -- Inddigital (talk) 23:05, 8 April 2021 (CEST)

Done, in an improved version I will add a page for technical notes

-- Thehunter (talk) 09:53, 7 April 2021 (CEST)

please add a few notes on maintenance, for example lubricate the blades regularly to avoids oxidation

Re: -- Inddigital (talk) 23:05, 8 April 2021 (CEST)

Done