Talk:Carla Cargo Crowd

From OHO - search engine for sustainable open hardware projects
Revision as of 04:22, 14 January 2022 by Inddigital (talk | contribs) (→‎-- ~~~~: new section)

-- Xtech2020 review (talk) 08:04, 16 December 2020 (CET)

Steel A36 is recommended for structural profiles and leave C45 for machined parts.

https://www.makeitfrom.com/compare/ASTM-A36-SS400-S275-Structural-Carbon-Steel/EN-1.0503-C45-Non-Alloy-Steel

Re: -- Inddigital (talk) 03:18, 11 April 2021 (CEST)

Ok, corrections have been made

-- Xtech2020 review (talk) 01:43, 8 April 2021 (CEST)

On uneven terrain, a suspension system such as springs for vertical loads on the rear wheel supports may be useful.

Re: -- Inddigital (talk) 03:18, 11 April 2021 (CEST)

All right, I will take this into account for a project improvement.

Part number 1 -- Xtech2020 review (talk) 01:46, 8 April 2021 (CEST)

Obviously they are welded parts, it would be good to indicate this in the specifications, since doing so in the drawings would add a lot of symbols.

Re: Part number 1 -- Inddigital (talk) 03:19, 11 April 2021 (CEST)

Well, an annotation was added in this regard

Part number 3 -- Xtech2020 review (talk) 02:01, 8 April 2021 (CEST)

missing part number balloons

Re: Part number 3 -- Inddigital (talk) 03:19, 11 April 2021 (CEST)

Done

Part number 4.2 -- Xtech2020 review (talk) 02:24, 8 April 2021 (CEST)

This part should be purchased, for example:
https://www.ebay.com/itm/Bike-trailer-hitch-coupler-connector-seat-tube-post-attachment-bicycle-adapter-/124447710784

Re: Part number 4.2 -- Inddigital (talk) 03:20, 11 April 2021 (CEST)

All right, I will take this into account for a project improvement.

Part number 3.6 -- Thehunter (talk) 00:00, 13 January 2022 (CET)

It is recommended to extend the specifications for this part

Part number 1.2.8 -- Thehunter (talk) 00:00, 13 January 2022 (CET)

It is recommended to include a wear bearing, as friction with the wheel axle can be significant.

-- Inddigital (talk) 04:22, 14 January 2022 (CET)

I recommend an inertia braking system for safety.

OPEN HARDWARE OBSERVATORY 2020
| |
|||