Lyman Filament Extruder V6

From OHO - search engine for sustainable open hardware projects
Revision as of 00:32, 1 September 2019 by Djaeger (talk | contribs)


Lyman Filament Extruder V6

Basic Data

Category: Foil press

URL (first publication): https://www.thingiverse.com/thing:1199870

Keywords: Foil pres, plastic press

License: CC BY-SA 3.0

Project status: Inactive


Technical documentation

Maturity of the project: production / DIY


CAD files are editable: No

Assembly instructions are published: Yes

Bill of materials is published: Yes







no

yes yes



Project management


Open-o-meter: 6

Product category: Hardware


TUB.90.1.jpg

Description

The Lyman Filament Extruder V6 was designed and built originally for a Church Group through Pastor Glenn Grimsley. As Glenn has had a bad accident and no longer communicates with me I have changed the Creative Commons Attributions to Share Alike.

This simple extruder worked so well I have made three, one for black, one white and one for other colored filaments. V6 Extruder is the simplest one I have designed and is easy to make and is inexpensive. Also, I am extruding the best ABS filaments with it.

As the design progressed a number of items have been updated, so I am including most of the 69 STL files created, though less than 20 are used. Thus you should go through them a pick the ones that you are capable of printing.

The attached Construction Manual should give you enough information to create one. In it is the BOM and wiring diagrams.

The Spool Winder is not included here but will be available in a new thing.

I have three (3) V6 extruders, one for white, one for black and the third for other color filaments.

Two items I do not use, one is the fan and the other is the variable speed control. I found that in my shop configuration that all I needed was the temperature adjustment and the nozzle size to control the diameter of the filament.


+ General Reviews General Reviews


Report this page


OPEN HARDWARE OBSERVATORY 2020
| |
|||