Difference between revisions of "Long Andre cargo bike"
| Line 478: | Line 478: | ||
}} | }} | ||
|certificate_requested=No | |certificate_requested=No | ||
|certificate_status= | |certificate_status=approved | ||
|reviewer1=Xtech2020 review | |reviewer1=Xtech2020 review | ||
|reviewer2=Thehunter | |reviewer2=Thehunter | ||
}} | }} | ||
Revision as of 12:02, 18 January 2022
|
Long Andre cargo bike Basic Data Category: Cargo bikes URL (first publication): https://www.youtube.com/watch?v=ppVBeQLBHhQ Keywords: bike, cargo, long andre, diy, metal tube, welding, sustainable energy License: CC BY-SA 4.0 Organization: Werkstatt Lastenrad Project status: Active Certification status: Approved Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: Yes Bill of materials is published: Yes
yes yes
|
Description
In this project, plans and instructions for the construction of a Long André cargo bike are shown.
This bike, as documented here, was developed by Andreas Triebenbacher. It consists of an old frame and semi-finished steel products that are readily available. The box encloses the two front wheels so that the surfaces can also be used for advertising. It is very suitable for short distances
This project is published under licence CC-BY-SA 4.0
Technical documentation
PDF Plans | |
|
|
Files: | |
CAD Files | |
|
|
Files: | |
Attestation | |
|
The project Long Andre cargo bike was reviewed by two reviewers from the OHO team. The review consisted of the following components:
1. Completeness check: Checks if all required documents have been submitted. 2. Review of the submitted documents: Checks if the information in the submitted documents is complete and correct. 2.1 Bill of materials - Are all parts and assemblies covered? - Are all quantities correct? - Are all required material specifications available? - Are all specifications for purchased parts and standard parts complete? 3.2 Technical drawings - Are all the required views available? - Are all required dimensional data available? 4.1 Suggestions for improvement Detail abot the review process: https://en.oho.wiki/wiki/Instructions_for_Reviewers Permanent Link: https://en.oho.wiki/index.php?title=Long_Andre_cargo_bike&oldid=43319 |
Files: | |
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A1 | 1 | LONG ANDRE CARGO BIKE A | A1 |
REV1: Approved |
|
|||
| A2 | 1 | LONG ANDRE CARGO BIKE A | A2 |
REV1: Approved |
|
|||
| B1 | 1 | PARTS LIST | B1 |
REV1: Approved |
|
|||
| 1 | 1 | Assembly1-Long André Cargo Bike | 1 | Assembly1-Long André Cargo Bike |
REV1: Approved |
|
||
| 1.1 | 1 | wl_lacb_1.1_Down-tube | 1.1 | Production | wl_lacb_1.1_Down-tube |
REV1: Approved |
|
|
| 1.2 | 1 | wl_lacb_1.2_Down-tube-bend | 1.2 | Production | wl_lacb_1.2_Down-tube-bend |
REV1: Approved |
|
|
| 1.3 | 1 | wl_lacb_1.3_Long-head-tube | 1.3 | Production | wl_lacb_1.3_Long-head-tube |
REV1: Approved |
|
|
| 1.4 | 1 | wl_lacb_1.4_short-head-tube | 1.4 | Production | wl_lacb_1.4_short-head-tube |
REV1: Approved |
|
|
| 1.5 | 1 | wl_lacb_1.5_Frame | 1.5 | Standard | wl_lacb_1.5_Frame.ipt |
REV1: Approved |
|
|
| 1.6 | 1 | wl_lacb_1.6_Fork-20 | 1.6 | Standard | wl_lacb_1.6_Fork-20.ipt |
REV1: Approved |
|
|
| 1.7 | 1 | wl_lacb_1.7_Joist | 1.7 | Production | wl_lacb_1.7_Joist |
REV1: Approved |
|
|
| 1.8 | 1 | wl_lacb_1.8_Stiffening-angle | 1.8 | Production | wl_lacb_1.8_Stiffening-angle |
REV1: Approved |
|
|
| 1.9 | 1 | wl_lacb_1.9_Short-steering-lever | 1.9 | Production | wl_lacb_1.9_Short-steering-leve |
REV1: Approved |
|
|
| 1.10 | 1 | wl_lacb_1.10_Cover-plates | 1.10 | Production | wl_lacb_1.10_Cover-plates |
REV1: Approved |
|
|
| 1.11 | 1 | wl_lacb_1.11_Cover-plates | 1.11 | Production | wl_lacb_1.11_Cover-plates |
REV1: Approved |
|
|
| 1.12 | 1 | wl_lacb_1.12_Cover-plates | 1.12 | Production | wl_lacb_1.12_Cover-plates |
REV1: Approved |
|
|
| 2 | 1 | Assembly2-Long André Cargo Bike A | 2 | Assembly2-Long André Cargo Bike A |
REV1: Approved |
|
||
| 2.1 | 1 | wl_lacb_2.1_Bearing-seat-cone | 2.1 | Standard | wl_lacb_2.1_Bearing-seat-cone |
REV1: Approved |
|
|
| 2.2 | 1 | wl_lacb_2.2_Long-steering-lever | 2.2 | Production | wl_lacb_2.2_Long-steering-lever |
REV1: Approved |
|
|
| 2.3 | 1 | wl_lacb_2.3_Handlebar | 2.3 | Production | wl_lacb_2.3_Handlebar |
REV1: Approved |
|
|
| 2.4 | 1 | wl_lacb_2.4_Sintered-bearing-housing | 2.4 | Production | wl_lacb_2.4_Sintered-bearing-housing |
REV1: Approved |
|
|
| 2.5 | 1 | wl_lacb_2.5_Angle-handlebar | 2.5 | Production | wl_lacb_2.5_Angle-handlebar |
REV1: Approved |
|
|
| 2.6 | 1 | wl_lacb_2.6_Short-steering-lever | 2.6 | Production | wl_lacb_2.6_Short-steering-lever |
REV1: Approved |
|
|
| 2.7 | 1 | wl_lacb_2.7_Shaft-extension | 2.7 | Production | wl_lacb_2.7_Shaft-extension |
REV1: Approved |
|
|
| 2.8 | 1 | wl_lacb_2.8_Angle-handlebar | 2.8 | Production | wl_lacb_2.8_Angle-handlebar |
REV1: Approved |
|
|
| 2.9 | 1 | wl_lacb_2.9_Steer-tube-1 | 2.9 | Standard | wl_lacb_2.9_Steer-tube-1" |
REV1: Approved |
|
|
| 2.10 | 1 | Inner Ring | 2.10 | Standard | ANSI_AFBMA 18.1 NR - 10x15x18 - 2_21.ipt |
REV1: Approved |
|
|
| 2.11 | 1 | Hex Jam Nut | 2.11 | Standard | ANSI B18.2.4.5M - M10 x 1.5 |
REV1: Approved |
|
|
| 2.12 | 2 | Metric Plain Washers | 2.12 | Standard | ANSI B18.22M - 10 N |
REV1: Approved |
|
|
| 2.13 | 1 | Metric Formed Hex Screw - Formed Hex Screw-Metric | 2.13 | Standard | ANSI B18.2.3.2M - M10 x 1,5 |
REV1: Approved |
|
|
| 2.14 | 1 | Broached Hexagon Socket Head Shoulder Screw-Metric | 2.14 | Standard | ANSI B18.3.3M - M6x1 x 31,25, BHSHSSM |
REV1: Approved |
|
|
| 2.15 | 1 | Hex Jam Nut | 2.15 | Standard | ANSI B18.2.4.5M - M6 x 1 |
REV1: Approved |
|
|
| 2.16 | 2 | Metric Plain Washers | 2.16 | Standard | ANSI B18.22M - 8 R |
REV1: Approved |
|
|
| 3 | 1 | Assembly3-Long André Cargo Bike A | 3 | Assembly3-Long André Cargo Bike A |
REV1: Approved |
|
||
| 3.1 | 1 | wl_lacb_3.1_Frame-loading-area | 3.1 | Production | wl_lacb_3.1_Frame-loading-area |
REV1: Approved |
|
|
| 3.2 | 1 | wl_lacb_3.2_Frame-loading-area | 3.2 | Production | wl_lacb_3.2_Frame-loading-area |
REV1: Approved |
|
|
| 3.3 | 1 | wl_lacb_3.3_Mounting-bracket | 3.3 | Production | wl_lacb_3.3_Mounting-bracket |
REV1: Approved |
|
|
| 3.4 | 1 | wl_lacb_3.4_Bracket-loading-area | 3.4 | Production | wl_lacb_3.4_Bracket-loading-area |
REV1: Approved |
|
|
| 3.5 | 1 | wl_lacb_3.5_Bracket-loading-area | 3.5 | Production | wl_lacb_3.5_Bracket-loading-area |
REV1: Approved |
|
|