Horizontal Shaft Turbine With Security Tail
|
Horizontal Shaft Turbine With Security Tail Basic Data Category: Wind turbines Keywords: horizontal, shaft, turbine, security, tail, diy, oho License: CC BY-SA 4.0 Organization: Youtube Guenther Hacker Project status: Active Certification status: In process Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: No Bill of materials is published: Yes
yes yes
|
|
Description
Reference: https://www.youtube.com/watch?v=3ISx_n-zkFo
Technical documentation
Complete PDF plans | |
|
|
Files: | |
CAD files | |
|
|
Attestation | |
|
The project Horizontal shaft turbine with security tail was reviewed by two reviewers from the OHO team. The review consisted of the following components:
1. Completeness check: Checks if all required documents have been submitted. 2. Review of the submitted documents: Checks if the information in the submitted documents is complete and correct. 2.1 Bill of materials - Are all parts and assemblies covered? - Are all quantities correct? - Are all required material specifications available? - Are all specifications for purchased parts and standard parts complete? 3.2 Technical drawings - Are all the required views available? - Are all required dimensional data available? 4.1 Suggestions for improvement Detail abot the review process: https://en.oho.wiki/wiki/Instructions_for_Reviewers Permanent Link: https://en.oho.wiki/index.php?title=Horizontal_Shaft_Turbine_With_Security_Tail&oldid=44627 |
Files: | |
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A1 | 1 | 3D views |
REV1: Approved |
|
||||
| A2 | 1 | Exploded 3D view |
REV1: Approved |
|
||||
| B1 | Parts list |
REV1: Approved |
|
|||||
| C1 | Technical notes |
REV1: Approved |
|
|||||
| 1.0 | 1 | Propelle |
REV1: Approved |
|
||||
| 1.2 | 3 | Turbine blade | Production | pipe D:110 cllipped, PVC |
REV1: Approved |
|
||
| 1.3 | 1 | Turbine sheet | Production | thickness: 3,0 mm, Galvanized Steel |
REV1: Approved |
|
||
| 1.4 | 12 | Bolt allen propeller | Standard | Bolt allen propeller, DIN-912 |
REV1: Approved |
|
||
| 1.5 | 12 | Nut propeller | Standard | Nut propeller, DIN-934 |
REV1: Approved |
|
||
| 2.0 | 1 | Body |
REV1: Approved |
|
||||
| 2.1 | 1 | Pipe body | Production | pipe D:76, PVC |
REV1: Approved |
|
||
| 2.2 | 1 | Pipe plug body | Production | PVC |
REV1: Approved |
|
||
| 2.3 | 1 | Dynamo | Buy | Dynamo, Hub Dynamo DH-3N30-A 6V-3W |
REV1: Approved |
|
||
| 2.4 | 1 | Flap piping | Production | PVC |
REV1: Approved |
|
||
| 2.5 | 1 | Weathervane | Production | Galvanized Steel |
REV1: Approved |
|
||
| 2.6 | 4 | Bolt allen body | Standard | Bolt allen body, DIN-912 |
REV1: Approved |
|
||
| 2.7 | 4 | Wood screw | Standard | Wood screw, DIN-7985 |
REV1: Approved |
|
||
| 2.8 | 1 | Nut Dynamo | Standard | Nut Dynamo, DIN-934 |
REV1: Approved |
|
||
| 2.9 | 1 | Tope nut dynamo | Standard | Tope nut dynamo, DIN-934 |
REV1: Approved |
|
||
| 2.10 | 4 | Nut body | Standard | Nut body, DIN-934 |
REV1: Approved |
|
||
| 3.0 | 1 | Support axel |
REV1: Approved |
|
||||
| 3.1 | 1 | Tub axel vertical | Production | Bronce |
REV1: Approved |
|
||
| 3.2 | 1 | Rubber guide | Production | Rubber |
REV1: Approved |
|
||
| 3.3 | 1 | Rubber buffer | Production | Rubber |
REV1: Approved |
|
||
| 3.5 | 2 | Washers | Standard | Washers, M20 DIN-9021, Galvanized Steel |
REV1: Approved |
|
||
| 3.6 | 1 | Pipe plug superior | Production | PVC |
REV1: Approved |
|
||
| 4.0 | 1 | Main support |
REV1: Approved |
|
||||
| 4.1 | 2 | Main support tube | Production | Schd 40, Galvanized Steel |
REV1: Approved |
|
||
| 4.2 | 1 | Ring tensor | Production | Galvanized Steel |
REV1: Approved |
|
||
| 4.3 | 4 | Soft wire | Standard | Soft wire, #12 twisted ends, Steel |
REV1: Approved |
|
||
| 4.4 | 4 | Angle | Production | L 25x25x4, Galvanized Steel |
REV1: Approved |
|
||