Difference between revisions of "Honey Extractor"
| Line 1: | Line 1: | ||
{{Projekt | {{Projekt | ||
|Images={{ProjektImages | |Images={{ProjektImages | ||
|projectimage= | |projectimage=Honey extractor.png | ||
}}{{ProjektImages | }}{{ProjektImages | ||
|projectimage=Oseg-bhe img02.jpg | |projectimage=Oseg-bhe img02.jpg | ||
Latest revision as of 19:16, 15 October 2021
|
Bee Honey Extractor Basic Data Category: Honey extractors URL (first publication): https://www.youtube.com/watch?v=fA4PiHWiLEs&t=195s Keywords: beekeeping, bee, honey, extractor, centrifugal, manual, diy License: CC BY 4.0 Organization: Garden Way Research Project status: Active Certification status: In process Technical documentation Maturity of the project: prototype
Contains PDF-drawings: Yes Assembly instructions are published: Yes Bill of materials is published: Yes
yes yes
|
Description
This Honey Extractor is designed to fit a standard, 20 gallon hot dipped galvanized trash can. Drill or cut a hole as close to the bottom of the can as possible, and solder a pipe nipple in place; this is the honey drain. Check the can for water leaks. Resolder joints if necessary.
It can be adapted to work with a variable speed drill
This project was developed by GARDEN WAY RESEARCH 1975 © and published under licence CC-BY
Technical documentation
PDF Plans | |
|
|
Files: | |
CAD Files | |
|
|
Files: | |
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A | 1 | HONEY EXTRACTOR | A | |
||||
| B | 1 | PART LIST | B | |
||||
| 1 | 1 | SHAFT | 1 | |
||||
| 1.1 | 1 | TOP SUPPORT | 1.1 | Production | |
|||
| 1.2 | 2 | CLAMP BLOCK | 1.2 | Production | |
|||
| 1.3 | 1 | SHAFT | 1.3 | Production | |
|||
| 1.4 | 1 | BEARING BLOCK | 1.4 | Production | |
|||
| 1.5 | 1 | FRAME PULLEY | 1.5 | Production | |
|||
| 1.6 | 1 | PULLEY A | 1.6 | Production | |
|||
| 1.7 | 1 | PULLEY B | 1.7 | Production | |
|||
| 1.8 | 2 | CURVE TO FIT INSIDE RIM | 1.8 | Production | |
|||
| 1.9 | 1 | WOOD HANDLE | 1.9 | Production | |
|||
| 1.10 | 1 | FRAME BLOCK | 1.10 | Production | |
|||
| 1.11 | 2 | ANSI/AFBMA 24.1 TA - 12TA11 12 x 26 x 9 | 1.11 | Standard | |
|||
| 1.12 | 2 | ANSI B18.17 - 1/4 - 20 Regular, TAWNI | 1.12 | Standard | |
|||
| 1.13 | 2 | ANSI B18.5 - 1/4-20 UNC - 2, RHBI | 1.13 | Standard | |
|||
| 1.14 | 11 | ANSI B18.2.2 - 1/2 - 13, HHJNI | 1.14 | Standard | |
|||
| 1.15 | 18 | ASTM F436 - 1/2, CW | 1.15 | Standard | |
|||
| 1.16 | 1 | ASME B18.21.1 - 1/2 Extra-Duty. Lock Washers (Inch Series)Extra-Duty Helical Spring Lock Washer | 1.16 | Standard | |
|||
| 1.17 | 1 | ANSI B18.5 - 1/2-13 UNC - 4, RHBI | 1.17 | Standard | |
|||
| 1.18 | 1 | ANSI B18.5 - 1/2-13 UNC - 6, RHBI | 1.18 | Standard | |
|||
| 1.19 | 4 | ANSI B18.6.4 - 6-20 - 1,5, SPHTSTBI | 1.19 | Standard | |
|||
| 2 | 1 | FRAME | 2 | |
||||
| 2.1 | 4 | FRAME SIDE | 2.1 | Production | |
|||
| 2.2 | 4 | FRAME END | 2.2 | Production | |
|||
| 2.3 | 1 | CENTER BLOCK | 2.3 | Production | |
|||
| 2.4 | 4 | AIR DEFLECTOR | 2.4 | Production | |
|||
| 2.5 | 2 | SCREEN STRIPS A | 2.5 | Production | |
|||
| 2.6 | 4 | SCREEN STRIPS B | 2.6 | Production | |
|||
| 2.7 | 1 | PLASTIC SCREEN | 2.7 | Production | |
|||
| 2.8 | 1 | PIPE NIPLE | 2.8 | Production | |
|||
| 2.9 | 1 | PERF METAL | 2.9 | Production | |
|||