DIY Solar Water Heater
|
DIY Solar Water Heater Basic Data Category: Solar collectors URL (first publication): https://www.youtube.com/watch?v=qsBIs7nAQ54 Keywords: thermal, heater, diy, water, heating, efficiency, renewable, sustainable, winter, frost, sun, purify, sanity License: CC BY-SA 4.0 Organization: OpenSourceLowTech Project status: Active Certification status: Approved Technical documentation
Contains PDF-drawings: Yes CAD files are editable: Yes Assembly instructions are published: Yes Bill of materials is published: Yes
yes yes
|
Description
High efficiency, DIY solar water heater panel with basic tools and materials.
Include fabrication blueprints and 3d models
This project is published under the terms of the CC-BY-SA 4.0
This project was supported by the german Foundation E.ON Stiftung.
Technical documentation
PDF Plans | |
|
|
Files: | |
CAD Files | |
|
|
Files: | |
Video | |
Files: | |
+ General Reviews 
Parts list
| Pos. | Qty. | Part Name | Part code | Part Type | Specifications | Review Status | Show All Comments | |
|---|---|---|---|---|---|---|---|---|
| A | Solar Water Heater | A |
REV1: Approved |
|
||||
| B | Part List | B |
REV1: Approved |
|
||||
| 1.0.0 | 1 | Panell Assembly | 1.0.0 |
REV1: Approved |
|
|||
| 1.1.0 | 1 | Panel structure 2 | 1.1.0 |
REV1: Approved |
|
|||
| 1.1.1 | 2 | Tube 25*25*2440 | 1.1.1 | Production | EN 10210-2 - 25 x 25 x 2 - 2440 |
REV1: Approved |
|
|
| 1.1.2 | 2 | Tube 25*25*1770 | 1.1.2 | Production | EN 10210-2 - 25 x 25 x 2 - 1170 |
REV1: Approved |
|
|
| 1.2.0 | 2 | Metal sheet | 1.2.0 | Production | thickness 1.2 mm |
REV1: Approved |
|
|
| 1.3.0 | 2 | Socket MGA | 1.3.0 | Standard | DIN 8063 Bonded MGA 25 |
REV1: Approved |
|
|
| 1.4.0 | 2 | Socket MGI | 1.4.0 | Standard | DIN 8063 Bonded MGI 3/4 |
REV1: Approved |
|
|
| 1.5.0 | 2 | Elbow | 1.5.0 | Standard | DIN 8063 90 Deg Elbow W1 25 |
REV1: Approved |
|
|
| 1.6.0 | 1 | Sheet seal | 1.6.0 | Production | Rubber, Thickness 4 mm |
REV1: Approved |
|
|
| 1.7.0 | 1 | Thermal Insulation | 1.7.0 | carton cover |
REV1: Approved |
|
||
| 1.8.0 | 1 | Panel structure 1 | 1.8.0 | panel-structure1 |
REV1: Approved |
|
||
| 1.8.1 | 2 | Tube 25*25*2390 | 1.8.1 | Production | EN 10210-2 - 25 x 25 x 2 - 2390 |
REV1: Approved |
|
|
| 1.8.2 | 2 | Tube 25*25*1220 | 1.8.2 | Production | EN 10210-2 - 25 x 25 x 2 - 1220 |
REV1: Approved |
|
|
| 1.9.0 | 124 | Washer | 1.9.0 | Standard | ISO 8738 - 8 |
REV1: Approved |
|
|
| 1.10.0 | 26 | Hex-Head Bolt | 1.10.0 | Standard | DIN 933 - M8 x 25 |
REV1: Approved |
|
|
| 1.11.0 | 62 | Hex Nut | 1.11.0 | Standard | DIN 555-5 - M8 |
REV1: Approved |
|
|
| 1.12.0 | 36 | Hex-Head Bolt | 1.12.0 | Standard | DIN 933 - M8 x 75 |
REV1: Approved |
|
|
| 2.0.0 | 1 | Tank Assembly | 2.0.0 |
REV1: Approved |
|
|||
| 2.1.0 | 1 | Tank with cap | 2.1.0 | Production | 200 L, volume optional |
REV1: Approved |
|
|
| 2.2.0 | 2 | Socket MGA | 2.2.0 | Standard | DIN 8063 Bonded MGA 25 |
REV1: Approved |
|
|
| 2.3.0 | 2 | Hose Barb to Male Pipe | 2.3.0 | Standard | Parker Hose Barb 90 Deg Elbow |
REV1: Approved |
|
|
| 2.4.0 | 2 | Socket MGI | 2.4.0 | Standard | DIN 8063 Bonded MGI 3/4 |
REV1: Approved |
|
|
| 2.5.0 | 2 | Connector | 2.5.0 | Standard | Lok Female thread - 5/8 x 1/2 |
REV1: Approved |
|
|
| 2.6.0 | 1 | Thermal Insulation | 2.6.0 | Production | Polystyrene or similar |
REV1: Approved |
|
|
| 2.7.0 | 1 | Copper coil | 2.7.0 | Production | 1/2 inch copper tube |
REV1: Approved |
|
|