OHO - search engine for sustainable open hardware projects - User contributions [en]

Talk:Wind Turbine with Vertical Metal Drum Sails

2022-01-07T12:25:03Z

Jaimerosciano: /* Part number 1.2 -- ~~~~ */ new section

== Part number 3.0 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 14:30, 22 December 2021 (CET) ==

It could inform the location of the land where it will be installed, excations and other

== Part number 2.0 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 19:53, 4 January 2022 (CET) ==

Add enlarged view of the lower assembly.

== Part number 2.15 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 19:53, 4 January 2022 (CET) ==

Pieces are separated and indicate cutting radius for the coupling of the 3 pieces.

== Part number 3.4 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 19:53, 4 January 2022 (CET) ==

Indicate the size of the part.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 13:24, 7 January 2022 (CET) ==

* The wooden surface that supports the wheels must be smooth and level, so that the travel has no resistance and friction is not increased.
* The axle must be well lubricated to avoid jamming due to friction between elements and corrosion caused by exposure to the environment.

== Part number 1.2 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 13:25, 7 January 2022 (CET) ==

quantity 4

Talk:Wind Turbine with Vertical Metal Drum Sails

2022-01-07T12:24:35Z

Jaimerosciano: /* -- ~~~~ */ new section

Talk:Savonius Rotor of 1m Diameter

2022-01-07T01:37:46Z

Jaimerosciano: /* -- ~~~~ */ new section

== Part number 1.3.1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 16:26, 4 January 2022 (CET) ==

Use as Black Iron material.

== Part number 3.0.0 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 16:27, 4 January 2022 (CET) ==

* Use as Black Iron material.
* indicate the size of the tube.

== Part number B1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 16:28, 4 January 2022 (CET) ==

Indicate quantity in POS 8.0.0

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 02:37, 7 January 2022 (CET) ==

It is suggested to place a protective box on the motor to protect it from dust.

Talk:Horizontal Shaft Turbine With Security Tail

2022-01-07T01:34:17Z

Jaimerosciano: /* Part number B1 -- ~~~~ */ new section

== Part number 4.0 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 14:20, 22 December 2021 (CET) ==

It could inform the location of the land where it will be installed. Excavatons and other

== Part number C1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 17:58, 4 January 2022 (CET) ==

Does not require wood treatment.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 02:32, 7 January 2022 (CET) ==

* Indicate the base where it will be installed, preferably concrete.
* It is suggested that the horizontal axis of the turbine be lubricated with grease that resists dust and water.
* The dimensions should not interfere with the technical lines.

== Part number B1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 02:34, 7 January 2022 (CET) ==

* Verify thickness of 1.3 on drawing shows 4mm.
* 1.5 is not shown in the exploded view on page 8.
* Verify several pos indicating 3.6, continue sequence

Talk:Horizontal Shaft Turbine With Security Tail

2022-01-07T01:32:42Z

Jaimerosciano: /* -- ~~~~ */ new section

Talk:Wind Mill Pump

2022-01-06T16:18:35Z

Jaimerosciano: /* -- ~~~~ */ new section

== Part number B -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 18:34, 4 January 2022 (CET) ==

POS 2.1 and 2.2 change to Production type.

== Part number 2 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 20:29, 4 January 2022 (CET) ==

Could add technical notes on installation and maintenance of the structure.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:18, 6 January 2022 (CET) ==

* Add the quantities of each part in the corresponding drawing.
* Add technical notes where shown:
* . Concrete base to obtain a firmer hold and minimize oscillations.
* . Sand and coat metal parts with corrosion protection paint.
* . Lubricate the rotating elements with water and dust resistant grease.

Talk:Tubular Plastic Biodigester

2022-01-05T23:07:21Z

Jaimerosciano: /* -- ~~~~ */ new section

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 00:07, 6 January 2022 (CET) ==

* It is recommended to place a valve to empty the toilet tap. And a valve to close the gas connection.
* Place in the main pipeline first the water trap and then the gas reservoir to have a better quality of the gas obtained.
* Place a shut-off valve for the pipe connecting to the gas reservoir, and a valve on the reservoir.

Talk:Whater Wheel Diameter 2m

2022-01-05T22:34:41Z

Jaimerosciano: /* -- ~~~~ */ new section

== Part number B1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 13:52, 22 December 2021 (CET) ==

It could inform the variations of the structure according to the terrain where it will be installed.

== Part number 2.0 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 13:54, 22 December 2021 (CET) ==

It could inform the variations of the longt e according to the terrain where it will be installed.

== Part number 1.1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 17:13, 4 January 2022 (CET) ==

Indicate sheet size.

== Part number 1.2 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 17:14, 4 January 2022 (CET) ==

* The dimensions of the holes must be aligned with the parallel external face and indicate the distance to the edge.

* Indicate sheet size.

== Part number 1.3 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 17:14, 4 January 2022 (CET) ==

* Indicate sheet size.
* Detail of the chamfer on the corners.

== Part number 1.4 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 17:15, 4 January 2022 (CET) ==

* Indicate sheet size.
* Indicate distance to the edge of the holes.

== Part number 1.5 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 17:16, 4 January 2022 (CET) ==

Indicate sheet size.

== Part number 1.6 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 17:16, 4 January 2022 (CET) ==

Indicate sheet size.

== Part number 1.7 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 17:16, 4 January 2022 (CET) ==

Steel C45 material.

== Part number 2.8 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 17:17, 4 January 2022 (CET) ==

Indicate cutting angle.

== Part number 3.1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 17:17, 4 January 2022 (CET) ==

Steel C45 Hardened Material.

== Part number 3.0 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 17:17, 4 January 2022 (CET) ==

Indicate method of connection between wood base and concrete pedestal. It is suggested to change the 3.0 piece for a steel plate that will be welded to an anchor plate embedded in the concrete.

== Part number C1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 17:18, 4 January 2022 (CET) ==

If available, indicate equipment capacity, limiting fluid volume, limiting wheel rotation speeds.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 23:34, 5 January 2022 (CET) ==

It should be mentioned that the efficiency of the water wheel is based on the increase of the wheel speed, that is to say, more turns per minute, this can be achieved in two ways, with a higher water flow that fills the buckets very fast and thus allows the rotation, or with a gearbox.

Talk:Solar Water Heater with Serpentine Collector

2022-01-05T22:00:13Z

Jaimerosciano: /* Part number 1.2 -- ~~~~ */ new section

== Part number 1.0 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:40, 13 December 2021 (CET) ==

Include weld joining details.

== Part number 1.2 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:40, 13 December 2021 (CET) ==

Consider separating the pieces.

== Part number 1.3 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:41, 13 December 2021 (CET) ==

Indicate the thickness of the part.

== Part number 1.4 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:41, 13 December 2021 (CET) ==

Indicate the thickness of the part.

== Part number 1.9 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:41, 13 December 2021 (CET) ==

Indicate the thickness of the part.

== Part number 3.0 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:41, 13 December 2021 (CET) ==

Indicate pipe diameter

== Part number 4.0 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:41, 13 December 2021 (CET) ==

Indicate pipe diameter

== Part number C1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:42, 13 December 2021 (CET) ==

Consider including technical details on the operation of the project.

== Part number C1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 03:30, 22 December 2021 (CET) ==

Could add weld types and methodology information.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 22:58, 5 January 2022 (CET) ==

* It is suggested to place two containers, one containing the fluid at room temperature and the other containing the fluid obtained at high temperature. This is because if both fluids are mixed in the same container, the efficiency of the Solar Water Heater is lost.

* The curves and descents in the pipes are subtracting energy to the fluid therefore the system needs a pump that provides the impulse for the circulation of the water.

== Part number 1.2 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 23:00, 5 January 2022 (CET) ==

indicate angle thickness

Talk:Solar Water Heater with Serpentine Collector

2022-01-05T21:58:02Z

Jaimerosciano: /* -- ~~~~ */ new section

Talk:Darrieus Turbine Made of PVC Pipes

2022-01-05T20:44:10Z

Jaimerosciano: /* Part number C1 -- ~~~~ */ new section

== Part number 2.0 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 14:09, 22 December 2021 (CET) ==

It could inform the location of the land where it will be instalado the frame

== Part number B1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 17:45, 4 January 2022 (CET) ==

* POS 1.1 and 1.2 indicate in specifications the commercial reference link of the equipment.
* POS 1.6 change to production type, indicate detailed plan.
* POS 2.1 - 2.3 - 2.4 and 2.5 change to production type.

== Part number B1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 21:34, 5 January 2022 (CET) ==

2.1 indicate thickness

== Part number C1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 21:44, 5 January 2022 (CET) ==

Indicate the base where the Darrieus turbine is to be placed, and the necessary care for its durability. For example, the rotating elements must have grease that is resistant to dust and water.

Talk:Darrieus Turbine Made of PVC Pipes

2022-01-05T20:34:05Z

Jaimerosciano: /* Part number B1 -- ~~~~ */ new section

Talk:Wood Cookstove Singer

2022-01-05T17:21:08Z

Jaimerosciano: /* -- ~~~~ */ new section

== -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 14:52, 3 December 2021 (CET) ==

Modify views and Maintain as per Technical Drawings guidelines on oho.Wiki

== -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 14:54, 3 December 2021 (CET) ==

Recommendation to use the symbology of technical drawing, as for the axis lines in circular objects, holes, dimensioning of diameters.

== Part number 1.0 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 14:55, 3 December 2021 (CET) ==

Maintaining views according to oho.wiki guidelines

== Part number 2.0 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 14:56, 3 December 2021 (CET) ==

It is suggested to place a detail view on the components of the chimney.

== Part number 5.0 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 14:57, 3 December 2021 (CET) ==

It is suggested to place a detail view on the components of the firebox door.

== Part number 10.0 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 14:58, 3 December 2021 (CET) ==

add wedge gauge, example # 12 or D: 3.0mm in specs

== Part number A1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 14:59, 3 December 2021 (CET) ==

== Part number B1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 15:01, 3 December 2021 (CET) ==

== Part number B1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 15:01, 3 December 2021 (CET) ==

== Part number A1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:51, 13 December 2021 (CET) ==

Attach detail views of inconspicuous elements, such as door and chimney.

== Part number 4.0 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:52, 13 December 2021 (CET) ==

Indicate bending angle.

== Part number B1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:49, 5 January 2022 (CET) ==

Check filename of pos A1 and A2, 7.0 and 8.0.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 18:21, 5 January 2022 (CET) ==

* It is recommended that items 5,6,7,8 and 10 be a separate set in order to be able to visualize their joints in more detail.

* Similarly, the chimney and its parts (4,2,9,11,3) should be a separate set to better appreciate their details.

* Add technical notes on the preparation of the materials, for example, for the stove pos 1, that the clay and sand are well fired and that the holes for inserting the nails have been previously made.

Talk:Wood Cookstove Singer

2022-01-05T16:49:31Z

Jaimerosciano: /* Part number B1 -- ~~~~ */ new section

Talk:Solar Water Heater with Corrugated Metal Collector

2022-01-05T16:37:03Z

Jaimerosciano: /* Part number C1 -- ~~~~ */ new section

== Part number B1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 19:35, 9 December 2021 (CET) ==

• Remove or change to English the specifications of POS 3.0 second line.

* Remove FILENAME for STANDARD parts.

* Add wood type specification, (Plywood, Hardwood or Kiln dried wood).

* Add numerical quantity in POS 1.7.

* Transfer numbering in POS.OLD box to POS. Section 4.12.

* Part name from POS 4.11 only indicate the name of the part, not the container file.

== Part number C1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:37, 5 January 2022 (CET) ==

Indicate that it should be placed on a metal base that keeps the wood free from contact with any wet surface.

Talk:Vertical Axis Sail Windmill - Diameter 3 m

2021-12-23T21:39:12Z

Jaimerosciano: /* Part number C1 -- ~~~~ */ new section

== Part number 3.0 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 05:40, 13 December 2021 (CET) ==

• Consider separating the pieces as they are distinct elements.

• Include dimension from the hole to the top edge.

== Part number 6.1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 05:41, 13 December 2021 (CET) ==

• Material: Steel C45 hardened

== Part number A1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 05:41, 13 December 2021 (CET) ==

• Consider attaching detail views of inconspicuous elements, such as the blade assembly and connecting means.

== Part number C1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 05:43, 13 December 2021 (CET) ==

• Consider attaching technical information of the project, regarding capacity and performance.

== Part number 3.0 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 03:47, 22 December 2021 (CET) ==

May include view with on-site installation

== Part number B1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 03:53, 22 December 2021 (CET) ==

It could include complementary equipment for operation, such as generator, transmission, battery.

== Part number C1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 22:39, 23 December 2021 (CET) ==

Apply to shaft with high dust and water resistance

Talk:Savonius Rotor with Two Blade Levels

2021-12-23T19:28:21Z

Jaimerosciano: /* -- ~~~~ */ new section

== Part number C1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:04, 13 December 2021 (CET) ==

• Remove C2 sheet from PDF file.

== Part number 1.1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:04, 13 December 2021 (CET) ==

• Consider separating the pieces as they are distinct elements.

== Part number 1.4 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:04, 13 December 2021 (CET) ==

• Consider separating the pieces as they are distinct elements.

== Part number 1.6 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:04, 13 December 2021 (CET) ==

• Consider separating the pieces as they are distinct elements.

== Part number 2.1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:05, 13 December 2021 (CET) ==

• Consider separating the pieces as they are distinct elements.

== Part number 3.2 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:05, 13 December 2021 (CET) ==

• Consider separating the pieces as they are distinct elements.

== Part number 1.7 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:05, 13 December 2021 (CET) ==

• Material: Steel C45 hardened

== Part number 1.8 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:05, 13 December 2021 (CET) ==

• Material: Steel C45 hardened

== Part number 1.9 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:06, 13 December 2021 (CET) ==

• Material: Steel C45 hardened

== Part number 3.3 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:06, 13 December 2021 (CET) ==

• Material: Steel C45 hardened

== Part number B1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:06, 13 December 2021 (CET) ==

• Standard parts exclude FILE NAME

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 20:28, 23 December 2021 (CET) ==

* It is recommended to place more support on the base of the motor.
* Place a protective box on the motor to protect it from rain and dust.
* Apply a lubricant that resists exposure to dust and water.

Talk:Segner Turbine for 4m Pit

2021-12-23T19:26:21Z

Jaimerosciano: /* -- ~~~~ */ new section

== Part number C1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 20:51, 17 December 2021 (CET) ==

Wood treatment is not necessary

== Part number 4.7 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 20:55, 17 December 2021 (CET) ==

Please place axis drawing symbols

It must be taken into account that the water flow drags air that when descending through the rotor will generate vibrations along the pipe, whose factors depend on the speed at which it descends, and its height. Therefore, it is recommended to place more supports to control the vibration.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 20:26, 23 December 2021 (CET) ==

It must be taken into account that the water flow drags air that when descending through the rotor will generate vibrations along the pipe, whose factors depend on the speed at which it descends, and its height. Therefore, it is recommended to place more supports to control the vibration.

Talk:Segner Turbine for 4m Pit

2021-12-23T19:26:10Z

Jaimerosciano: /* -- Jaimerosciano (talk) 04:39, 23 December 2021 (CET) */

Talk:Axial Flow Turbine 25kW

2021-12-23T18:37:13Z

Jaimerosciano: /* Part number 10.0 -- ~~~~ */ new section

== -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 20:29, 3 December 2021 (CET) ==

# An individual, isometric view of the whole could show more detail.
# Recommendation to use the technical drawing symbology, regarding axis lines in circular objects, holes, dimensioning of diameters.
# Recommendation to use technical drawing symbology in: welded parts indications, section identification.

== Part number 11.1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 20:32, 3 December 2021 (CET) ==

In Pos 11.1-11.2-11.3-11.4 parts could be independent assemblies and show their parts separately.

== Part number 11.4 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 20:33, 3 December 2021 (CET) ==

On parts of Pos11.4-11.5 - indicate hole diameters

== Part number C1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 20:35, 3 December 2021 (CET) ==

== Part number B1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 20:40, 3 December 2021 (CET) ==

== Part number 1.1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 22:52, 10 December 2021 (CET) ==

I recommend placing steelDIN C45, in materials, to be more explicit

== Part number 9.1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 23:03, 10 December 2021 (CET) ==

I recommend placing steelDIN C45, in materials, to be more explicit

== Part number 9.2 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 23:03, 10 December 2021 (CET) ==

I recommend placing steelDIN C45, in materials, to be more explicit

== Part number 11.1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 02:20, 13 December 2021 (CET) ==

• Consider separating into 2 pieces, as they are different elements.

== Part number 11.2 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 02:20, 13 December 2021 (CET) ==

• Consider separating into 2 pieces, as they are different elements.

== Part number 11.3 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 02:21, 13 December 2021 (CET) ==

• Consider separating into 2 pieces, as they are different elements.

== Part number 11.4 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 02:22, 13 December 2021 (CET) ==

• Consider separating all parts, as they are distinct elements.

• Indicate hole diameters in the DV detail.

== Part number 11.5 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 02:23, 13 December 2021 (CET) ==

• Indicate diameter of holes.

• Preferable to use Steel C45.

== Part number 12.6 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 02:23, 13 December 2021 (CET) ==

• Indicate width 79mm

== Part number 12.10 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 02:24, 13 December 2021 (CET) ==

• Indicar longitud total.

== Part number 12.0 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 02:25, 13 December 2021 (CET) ==

• On the sheets of each part, it would be advisable to indicate the cross-section, where it is possible to observe its dimensioned contracted shape.

== Part number 13.1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 02:25, 13 December 2021 (CET) ==

• Preferable to use Steel C45.

== Part number B1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 02:26, 13 December 2021 (CET) ==

• POS 14 and 15, preferably indicate in specifications a link to a model on the internet.

== Part number 10.0 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 19:37, 23 December 2021 (CET) ==

* It is recommended that the structure supporting the motor be supported on a concrete base to minimize vibrations and prolong the life of the motor.

Talk:Parabolic Solar Cooker with Aluminium Reflector

2021-12-23T04:01:37Z

Jaimerosciano: /* -- ~~~~ */ new section

== Part number 2.1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 22:23, 15 December 2021 (CET) ==

Cross-sectional dimensions of the part are recommended

== Part number 2.2 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 22:24, 15 December 2021 (CET) ==

It is recommended to show part thickness

== Part number A1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 22:28, 15 December 2021 (CET) ==

The use of more axis symbols is suggested.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 05:01, 23 December 2021 (CET) ==

* It is recommended to use mirrors instead of aluminum in the receiver to achieve higher temperatures.

Talk:Segner Turbine for 4m Pit

2021-12-23T03:39:11Z

Jaimerosciano: /* -- ~~~~ */ new section

Talk:Lattice Tower Mast for Wind Turbine

2021-12-22T23:14:44Z

Jaimerosciano: /* Part number 1.2 -- Jaimerosciano (talk) 00:12, 23 December 2021 (CET) */

== Part number C1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 21:54, 9 December 2021 (CET) ==

- Delete rows without information.
- Delete C3 sheet, it contains no information.

== Part number B1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 07:15, 11 December 2021 (CET) ==

• The metal parts must be made of galvanized steel, or must be protected with an anti-corrosive epoxy material.

• The connecting means must be made of galvanized steel.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 00:08, 23 December 2021 (CET) ==

* The structure must have a firm base to avoid strong oscillations due to air currents, therefore it is recommended that the structure be placed on a concrete base.
* Consider performing a finite element analysis (FEA), and evaluate the weight of the structure and the generator for its assembly.

== Part number 3.0 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 00:11, 23 December 2021 (CET) ==

* It is recommended to place a base on the 3.1 tube to increase its stability.

== Part number B1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 00:13, 23 December 2021 (CET) ==

* 1.0 Page 8 place item 1.9 in part list
* 1.2 check part type as it indicates to be production.

Talk:Lattice Tower Mast for Wind Turbine

2021-12-22T23:13:52Z

Jaimerosciano: /* Part number B1 -- ~~~~ */ new section

== Part number C1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 21:54, 9 December 2021 (CET) ==

- Delete rows without information.
- Delete C3 sheet, it contains no information.

== Part number B1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 07:15, 11 December 2021 (CET) ==

• The metal parts must be made of galvanized steel, or must be protected with an anti-corrosive epoxy material.

• The connecting means must be made of galvanized steel.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 00:08, 23 December 2021 (CET) ==

* The structure must have a firm base to avoid strong oscillations due to air currents, therefore it is recommended that the structure be placed on a concrete base.
* Consider performing a finite element analysis (FEA), and evaluate the weight of the structure and the generator for its assembly.

== Part number 3.0 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 00:11, 23 December 2021 (CET) ==

* It is recommended to place a base on the 3.1 tube to increase its stability.

== Part number 1.2 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 00:12, 23 December 2021 (CET) ==

Check part type as it indicates to be production.

== Part number B1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 00:13, 23 December 2021 (CET) ==

* 1.0 Page 8 place item 1.9 in part list
* 1.2 check part type as it indicates to be production.

Talk:Lattice Tower Mast for Wind Turbine

2021-12-22T23:12:23Z

Jaimerosciano: /* Part number 1.2 -- ~~~~ */ new section

== Part number C1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 21:54, 9 December 2021 (CET) ==

- Delete rows without information.
- Delete C3 sheet, it contains no information.

== Part number B1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 07:15, 11 December 2021 (CET) ==

• The metal parts must be made of galvanized steel, or must be protected with an anti-corrosive epoxy material.

• The connecting means must be made of galvanized steel.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 00:08, 23 December 2021 (CET) ==

* The structure must have a firm base to avoid strong oscillations due to air currents, therefore it is recommended that the structure be placed on a concrete base.
* Consider performing a finite element analysis (FEA), and evaluate the weight of the structure and the generator for its assembly.

== Part number 3.0 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 00:11, 23 December 2021 (CET) ==

* It is recommended to place a base on the 3.1 tube to increase its stability.

== Part number 1.2 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 00:12, 23 December 2021 (CET) ==

Check part type as it indicates to be production.

Talk:Lattice Tower Mast for Wind Turbine

2021-12-22T23:11:04Z

Jaimerosciano: /* Part number 3.0 -- ~~~~ */ new section

Talk:Lattice Tower Mast for Wind Turbine

2021-12-22T23:09:21Z

Jaimerosciano: /* -- Jaimerosciano (talk) 00:08, 23 December 2021 (CET) */

Talk:Lattice Tower Mast for Wind Turbine

2021-12-22T23:08:17Z

Jaimerosciano: /* -- ~~~~ */ new section

Talk:Windmill Blades - Diameters 60 to 120 mm

2021-12-22T16:30:37Z

Jaimerosciano: /* -- ~~~~ */ new section

== Part number B1 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 03:58, 22 December 2021 (CET) ==

It could include complementary equipment for operation, such as generator, axles

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:29, 22 December 2021 (CET) ==

Add mechanical fastening (key)

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:30, 22 December 2021 (CET) ==

Add technical notes
* Lubricate the shaft connection.

Talk:Windmill Blades - Diameters 60 to 120 mm

2021-12-22T16:29:24Z

Jaimerosciano: /* -- ~~~~ */ new section

Talk:Solar Food Dryer for Vegetables

2021-12-22T16:26:40Z

Jaimerosciano: /* -- ~~~~ */ new section

== Part number B1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:17, 13 December 2021 (CET) ==

• Include parts 12.0 and 13.0

* It is recommended to internally coat with aluminum foil to optimize heat transfer.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:20, 22 December 2021 (CET) ==

Add technical notes specifying the following:
* Bake the wood before use to remove moisture.
* Varnish wood to protect it from moisture.

== Part number B1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:22, 22 December 2021 (CET) ==

Place blank in the part type box of pos 7.0

== Part number 4.0 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:23, 22 December 2021 (CET) ==

* Add a support that can hold the damper in case you want constant ventilation.

== Part number 7.9 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:23, 22 December 2021 (CET) ==

Material change to glass, as it allows more radiation.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:26, 22 December 2021 (CET) ==

* It is recommended to internally coat with aluminum foil to optimize heat transfer.

Talk:Solar Food Dryer for Vegetables

2021-12-22T16:26:00Z

Jaimerosciano: /* -- Jaimerosciano (talk) 17:20, 22 December 2021 (CET) */

Talk:Solar Food Dryer for Vegetables

2021-12-22T16:23:58Z

Jaimerosciano: /* Part number 7.9 -- ~~~~ */ new section

== Part number B1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 04:17, 13 December 2021 (CET) ==

• Include parts 12.0 and 13.0

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:20, 22 December 2021 (CET) ==

It is recommended to line internally with aluminum foil for higher radiation.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:20, 22 December 2021 (CET) ==

Add technical notes specifying the following:
* Bake the wood before use to remove moisture.
* Varnish wood to protect it from moisture.

== Part number B1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:22, 22 December 2021 (CET) ==

Place blank in the part type box of pos 7.0

== Part number 4.0 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:23, 22 December 2021 (CET) ==

* Add a support that can hold the damper in case you want constant ventilation.

== Part number 7.9 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:23, 22 December 2021 (CET) ==

Material change to glass, as it allows more radiation.

Talk:Solar Food Dryer for Vegetables

2021-12-22T16:23:14Z

Jaimerosciano: /* Part number 4.0 -- ~~~~ */ new section

Talk:Solar Food Dryer for Vegetables

2021-12-22T16:22:14Z

Jaimerosciano: /* Part number B1 -- ~~~~ */ new section

Talk:Solar Food Dryer for Vegetables

2021-12-22T16:21:17Z

Jaimerosciano: /* -- Jaimerosciano (talk) 17:20, 22 December 2021 (CET) */

Talk:Solar Food Dryer for Vegetables

2021-12-22T16:20:58Z

Jaimerosciano: /* -- ~~~~ */ new section

Talk:Solar Food Dryer for Vegetables

2021-12-22T16:20:02Z

Jaimerosciano: /* -- ~~~~ */ new section

Talk:Himalayan Water Wheel

2021-12-22T16:16:07Z

Jaimerosciano: /* Part number 4.1.3 -- ~~~~ */ new section

== Part number B1-2 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 03:38, 13 December 2021 (CET) ==

• POS 7.0, preferably indicate in specifications a link to a model on the internet.

• In B2 delete empty row.

== Part number 8.0.0 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 03:38, 13 December 2021 (CET) ==

• Consider separating the pieces as they are distinct elements.

== Part number 8.0.0 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 21:42, 15 December 2021 (CET) ==

Consider separating the pieces as they are distinct elements

== Part number B1-2 -- [[User:Dmosquera1968|Dmosquera1968]] ([[User talk:Dmosquera1968|talk]]) 21:55, 15 December 2021 (CET) ==

Similar to the previous one

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:09, 22 December 2021 (CET) ==

* The structure must have support legs, to resist the load and momentum of the water, and minimize vibrations that may affect the motor.

* For greater energy efficiency it is recommended that the water flow impacts the buckets in a horizontal direction (pos 4.2), i.e. normal to their surface.

* Protect the motor with an enclosure that avoids contact with water splashes or other elements such as dust.

== Part number A2 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:10, 22 December 2021 (CET) ==

Indicate only the item of general assemblies 1.0,2.0,3.0....10.0

== Part number B1-2 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:12, 22 December 2021 (CET) ==

Place specifications for thickness for sheets, profile for angles, and diameter for shafts.
* Pos 1.0 page 8 leave blank in part type.

== Part number C1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:13, 22 December 2021 (CET) ==

Add:
* Add water resistant grease to rolling elements.
Paint with special water resistant paint those elements that may come in contact with the fluid, especially pos 4.2.

== Part number 1.2.0 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:14, 22 December 2021 (CET) ==

ASTM A36 material is recommended.

== Part number 3.0.0 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:15, 22 December 2021 (CET) ==

It is recommended to place the water discharge in a separate structure to avoid stresses and vibrations.

== Part number 4.1.3 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 17:16, 22 December 2021 (CET) ==

Check name

Talk:Himalayan Water Wheel

2021-12-22T16:15:30Z

Jaimerosciano: /* Part number 3.0.0 -- ~~~~ */ new section

Talk:Himalayan Water Wheel

2021-12-22T16:14:42Z

Jaimerosciano: /* Part number 1.2.0 -- ~~~~ */ new section

Talk:Himalayan Water Wheel

2021-12-22T16:13:38Z

Jaimerosciano: /* Part number C1 -- ~~~~ */ new section

Talk:Himalayan Water Wheel

2021-12-22T16:12:17Z

Jaimerosciano: /* Part number B1-2 -- ~~~~ */ new section

Talk:Himalayan Water Wheel

2021-12-22T16:10:57Z

Jaimerosciano: /* Part number A2 -- ~~~~ */ new section

Talk:Himalayan Water Wheel

2021-12-22T16:09:59Z

Jaimerosciano: /* -- ~~~~ */ new section

Talk:Floating Dome Biodigestor

2021-12-22T15:45:17Z

Jaimerosciano: /* Part number 5.0 -- ~~~~ */ new section

== Part number C1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 03:25, 13 December 2021 (CET) ==

• Consider eliminating empty rows.

• Consider adding relevant information regarding the operation of the project.

• Remove C3 sheet from PDF file.

== Part number 3.6 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 03:25, 13 December 2021 (CET) ==

• Indicate smaller diameter.

• Indicate weld at joint.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 15:29, 22 December 2021 (CET) ==

It is recommended that the fluid entering the biodigester is done from the top of the large tank, so that the force of gravity favors and avoids the effort for clogging.
* It is recommended to place a rubber washer around the biodigester to act as an odor seal.

== Part number A1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 15:30, 22 December 2021 (CET) ==

Page 2 place drawing scale

== Part number B1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 15:32, 22 December 2021 (CET) ==

It is recommended to number the items first the production items and then the standard items for better visual order when reading the drawings.
* Place dimensions only in specifications.

== Part number C1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 16:41, 22 December 2021 (CET) ==

Add that all pipe connections must be Teflon to avoid fluid spills.

== Part number 5.0 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 16:45, 22 December 2021 (CET) ==

The structure could have a central pipe that crosses the Pvc small tank and has a support that has support of its walls so that when it rises it is vertical and does not tilt, thus avoiding the emanation of odors. For this, the pipes must be of a larger diameter.

Talk:Floating Dome Biodigestor

2021-12-22T15:41:34Z

Jaimerosciano: /* Part number C1 -- ~~~~ */ new section

Talk:Floating Dome Biodigestor

2021-12-22T15:39:38Z

Jaimerosciano: /* Part number B1 -- Jaimerosciano (talk) 15:35, 22 December 2021 (CET) */

Talk:Floating Dome Biodigestor

2021-12-22T14:36:58Z

Jaimerosciano: /* Part number B1 -- Jaimerosciano (talk) 15:32, 22 December 2021 (CET) */

== Part number C1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 03:25, 13 December 2021 (CET) ==

• Consider eliminating empty rows.

• Consider adding relevant information regarding the operation of the project.

• Remove C3 sheet from PDF file.

== Part number 3.6 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 03:25, 13 December 2021 (CET) ==

• Indicate smaller diameter.

• Indicate weld at joint.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 15:29, 22 December 2021 (CET) ==

It is recommended that the fluid entering the biodigester is done from the top of the large tank, so that the force of gravity favors and avoids the effort for clogging.
* It is recommended to place a rubber washer around the biodigester to act as an odor seal.

== Part number A1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 15:30, 22 December 2021 (CET) ==

Page 2 place drawing scale

== Part number B1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 15:32, 22 December 2021 (CET) ==

It is recommended to number the items first the production items and then the standard items for better visual order when reading the drawings.
* Place dimensions only in specifications.

== Part number B1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 15:35, 22 December 2021 (CET) ==

It is recommended to number the items first the production items and then the standard items for better visual order when reading the drawings.

Talk:Floating Dome Biodigestor

2021-12-22T14:35:05Z

Jaimerosciano: /* Part number B1 -- ~~~~ */ new section

== Part number C1 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 03:25, 13 December 2021 (CET) ==

• Consider eliminating empty rows.

• Consider adding relevant information regarding the operation of the project.

• Remove C3 sheet from PDF file.

== Part number 3.6 -- [[User:Jeefri|Jeefri]] ([[User talk:Jeefri|talk]]) 03:25, 13 December 2021 (CET) ==

• Indicate smaller diameter.

• Indicate weld at joint.

== -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 15:29, 22 December 2021 (CET) ==

It is recommended that the fluid entering the biodigester is done from the top of the large tank, so that the force of gravity favors and avoids the effort for clogging.
* It is recommended to place a rubber washer around the biodigester to act as an odor seal.

== Part number A1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 15:30, 22 December 2021 (CET) ==

Page 2 place drawing scale

== Part number B1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 15:32, 22 December 2021 (CET) ==

It is recommended to number the items first the production items and then the standard items for better visual order when reading the drawings.

== Part number B1 -- [[User:Jaimerosciano|Jaimerosciano]] ([[User talk:Jaimerosciano|talk]]) 15:35, 22 December 2021 (CET) ==

It is recommended to number the items first the production items and then the standard items for better visual order when reading the drawings.